Official Freewing 90mm F-16 V2 EDF Jet Thread

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • EDF-Jetpilot
    replied
    Originally posted by Reptielenfreak
    There was mentions of people concernt about the 2x 4s 5000mah. With a paralel connector.. how other than this do you connect them?
    Ich habe 4x 8S LiPos mit 5000mA/h, mit denen kann ich gut 20min. fliegen. Da brauchst du keine Y-Kabel und es gibt keine Probleme.

    Leave a comment:


  • Evan D
    replied
    Series connector.

    Leave a comment:


  • Reptielenfreak
    replied
    There was mentions of people concernt about the 2x 4s 5000mah. With a paralel connector.. how other than this do you connect them?

    Leave a comment:


  • EDF-Jetpilot
    replied
    Ich habe gestern die 8S Version bestellt... hoffe die Lieferung in die Schweiz kommt auch bald.

    Leave a comment:


  • Evan D
    replied
    Thanks Tom!

    Leave a comment:


  • Tom
    replied
    Thank you to all who have ordered so far. I hope you love this plane as much as we do. It looks like they are going to arrive here in IL a day early! Assuming they show up tomorrow morning as scheduled, we will send out all pre-orders tomorrow (Friday).

    Leave a comment:


  • EDF-Jetpilot
    replied
    Originally posted by jdidio1
    Does anyone know if the V2 landing gear will fit in the V1 plane? Does anyone know where to find gear parts for V1? specifically looking for the front gear strut.
    im Internet findet man alles von Freewing... man muss manchmal nur ein bisschen weltoffen sein. ;-)

    Leave a comment:


  • jdidio1
    replied
    Does anyone know if the V2 landing gear will fit in the V1 plane? Does anyone know where to find gear parts for V1? specifically looking for the front gear strut.

    Leave a comment:


  • 400driver
    replied
    That was a pretty nice landing! Speed seemed manageable. Looking forward to more videos before I pull the trigger.

    Leave a comment:


  • MetallDanny
    replied
    No further comment 🤠!!

    Leave a comment:


  • Reptielenfreak
    replied
    I love this new scheme, just have to wait for some spare money 😅

    Leave a comment:


  • N827TM
    replied
    I hope the V2, bird will be released in the Thunderbird scheme. I can’t get parts for my V1 any more. If the Thunderbird scheme is released in V2 I will buy one.

    Tom​

    Leave a comment:


  • Hugh Wiedman
    replied
    Originally posted by BirdTree

    Is the RadioMaster TX16s working with this newest Spektrum (+plus ) update. ? Anyone here use it yet !
    As Evan said, it is possible to update the AR637T/838360T/10360T to plus by simply using the Spektrum programmer app on your home computer, along with the Spektrum Programming cable SPMA3065. The question is can you then program the RX using Forward Programming on your RadioMaster TX16 for full functionality for gains/orientation/FM's/gain channels/etc. If you already were able to use any of those older 3 AS3X RX's with your TX and program them, you can then program any "plus" Spektrum RX the same way.

    I just don't know if those RX's are only compatible (for functionality programming) with other TX's. You could always call HH and ask them how/if you can use your TX with their AS3X receivers. Non AS3X Spektrum RX's will work with most other TX's. I suspect HH/Spektrum does this to "force" people who want to use their gyro receivers to also buy their TX's. I also assume these gyro RX upgrades were done to try and keep up with the $300+ Cortex Demo gyros.

    Leave a comment:


  • Evan D
    replied
    The update is for specific Spektrum transmitters and receivers.

    If you mean for the receivers? Yes the receivers still work as long as you have DSMX on your RM. Yes the upgraded capabilities can be used on the receivers if you can figure out a way to do the forward programming which, as far as I know the RM can not do. Of course the transmitter up date only applies to specific Spektrum transmitters.

    Leave a comment:


  • BirdTree
    replied
    Originally posted by Reptielenfreak
    No, the ESC doesnt matter it can however give you additional info. So just the reciever and transmitter will do the trick
    Is the RadioMaster TX16s working with this newest Spektrum (+plus ) update. ? Anyone here use it yet !

    Leave a comment:


  • Reptielenfreak
    replied
    No, the ESC doesnt matter it can however give you additional info. So just the reciever and transmitter will do the trick

    Leave a comment:


  • BirdTree
    replied
    Originally posted by Hugh Wiedman

    The Spektrum RX upgrade to "plus" has made a huge difference. Also turned my F18's from an adventure in flying to incredibly rock solid and a breeze to land perfectly every time.:
    With this new"Plus" upgrade to the Spectrum receivers, can you use all of it's features and benefits even if you pair it with a non-Spektrum ESC and a RadioMaster TX16s transmitter? Or do the Spectrum "Plus" receivers require a Spectrum ESC and Spectrum transmitter to take full advantage of all it's functions ?

    Leave a comment:


  • rifleman_btx
    replied
    Originally posted by Evan D
    Looks crystal clear in the videos.



    Yes I seen an fpv video with it already, and totally agree that it is crystal clear.

    Leave a comment:


  • Reptielenfreak
    replied
    If you want to make it move faster you have to give the gear etc a seperate channel and "tune" it manually. I think john from 2brothersrc on youtube habe some setup guids about that.

    Leave a comment:


  • kallend
    replied
    Does the control board result in glacially slow gear/door sequencing, like the boards in FW's (new) Eurofighter and twin 64mm F-14

    Leave a comment:

Working...