301 results in 0.0104 seconds.
-
I received my T-26 yesterday. I've started a thread on the 3DP T-26. Mine actually is a good deal. All electronics and mechanics already installed, a... -
Questions regarding Tongde Leopard 2A7
Hello everyone. I’m new here and new to the RC hobby. I recently bought the Tongde Leopard 2A7 Professional Plus Edition. For the price it’s a very...
-
Thanks for posting.
I hope you chronicle your build in this forum thread and we all can benefit from your experience.
Looks...Leave a comment:
-
That's a good way to go!!! AHHQ'S 1/16 model kits made by Tankom have very good details, and some kits have options to model the beginning, or the end...Leave a comment:
-
If this seller doesn't do custom masks, here's another possible solution.
Have you ever heard of the Cricut machine? I don't expect you...Leave a comment:
-
Here's the link. SYB1000P Army Star RC Body Vinyl Paint Mask/ Stencil Kit | eBay https://share.google/zTU1Le9JoHzn05FTcLeave a comment:
-
WOW!!! Best job you ever had!!!!!!! I wish I could say the same thing. I'm a class of 78 graduate.
Well, at least I thought you may have...Leave a comment:
-
No, I'm not a Vietnam vet, but I served with a lot of them. I enlisted after high school in 1976. Served as a Combat Engineer in an Armor unit and was...Leave a comment:
-
Ok thanks very much, I’ll get one of those. Trouble is, it’s a big old 19.2 lb Hangar 9 Spit which I bought off somebody and the remote is hidden...Leave a comment:
-
I am considering Andy's Hobby M3/M3a1 static model too at lower cost.
https://www.ebay.com/itm/188386505827?_trkparms=amclksrc%3DITM%26aid%3D1110...Leave a comment:
-
Ill wrap the factory Cobra iron with the 1.6mm and sell it and get ready for the Arnon7 cores with thinner lams and thicker arms
...
Leave a comment:
-
The user doesn't have 6 weeks to wait even though the wire was special order so I sent it back to Huntington beach CA as is. I have a lot of contract...Leave a comment:
-
Older (3 pin) remotes don't work with the AR10360T, they use a different protocol. They changed to a 4 pin plug to prevent people from trying.
...Leave a comment:
-
Again I would ask but maybe this will help. One pin is not used.
57601.2 Spektrum DSMX Serial Race Receiver V2 Manual_MULTI.indbLeave a comment:
-
Sorry yes, I meant remote receiver.Leave a comment:
-
My understanding is you can't put a satellite into that port, only a remote receiver. I would ask in the radio section of RCG.Leave a comment:
-
3 pin remote aerial to SRXL2 port ?
I want to connect a remote aerial to the SRXL2 port on my AR10360T receiver. It’s a 3 pin connector but a 4 pin port. Do I need an adapter? The 3 pin...
-
With tank-me's guidance, I opened the other access points. The on/off switch is in the back, so I turned it on to check. Everything works! I am impressed,...Leave a comment:
-
Hey, thanks for the tip. There ain't no instructions! I have a hankering to paint it for the Spanish Civil War, but that remains to be seen. It's actually...
Leave a comment:
-
Well, it looks to be printed pretty well. This was the first tank I attempted to print on my first 3D printer as it was small and that printer took FOREVER...Leave a comment:
-
Thinking about building another one of these. Are there any improvements for the main gear? It's this plane or a top flite dc3....Leave a comment:
-
Eagle 15,
I have an FAA number that I acquired when they first came out. I haven't put any no. on my scale planes and since our club field is...Leave a comment:
-
T-26 Soviet Light Tank, a 3D Print Model
This is a first look only of a T-26 Soviet Light Tank I ordered from a seller in China. It's a 3D print, one of a collection on eBay and elsewhere. At...
-
Here's one of AHHQ's finished kit wheels mounted on one of the dual rear Diff's with one of the RC wheels I was planning to use for my M8 RC conversion....
Leave a comment:
-
Here's the fruit of my labor today. Here's the first AHHQ's kit wheel dry fitted with the modified hex drive hub with the Donut that will support the...
Leave a comment:
-
Finally, the styrene Donut was removed from the arbor and separated into eight individual Donuts!!!!!!!!!!
...Leave a comment:
-
Then I made the arbor to turn the diameter to fit into the wheel of AHHQ's kit wheels. These Donuts as I've called them will support the back end of the...
Leave a comment:
-
Hi all,
quick question, do any of yall have an FAA registration tag “displayed on the outside of your aircraft”?
This is my first time...Leave a comment:
-
Finally, the hole was bored to size, and it was a nice straight hole so the biggest hub closely fit the bore.
...Leave a comment:
-
Next. I cut some 1/16" aluminum shams so the styrene triangle would be firmly held in the lathes 3 jaw chuck. Then I center drilled and then drilled...
Leave a comment:
Leave a comment: