Davegee,
Fantastic! What are your low rates set at on your Spektrum for ail., Ele., and rudder? I want the best chance for success I can get. That's...
223 results in 0.0102 seconds.
-
We talked about this today at the field. 2 people has the IX20. One is perfectly fine when charging. The other has problems getting to full charge...Leave a comment:
-
I got the maiden flight in on the P-12 this morning. There was some wind and turbulence, so I have to discount that a little bit regarding judging the...Leave a comment:
-
Thanks, Steve. I do have almost the complete roll of the LW-PLA. I tried a couple small projects with it but it turned out exactly the same weight as...Leave a comment:
-
Dave,
With the added flexibility and 20% infill the wall thickness can be reduced.
That will decrease the weight more than the...Leave a comment:
-
Great info, Thanks! This was a brand I had not heard of before offered on Amazon, but hopefully it will work. Worth a try. The biggest breakthrough is...Leave a comment:
-
Dave,
Flexible filaments like TPU should be printed at higher temperatures.
230C is good starting point and you can reduce...Leave a comment:
-
Leave a comment:
-
Charging Issues with IX14/IX20
Since I first got the IX Transmitter, which I absolutely love, especially using the AR637T/8/10 Plus RX's with outstanding gyro/nose wheel setups and... -
I had the same issue. Calibrate the throttle/ESC....with no power to the plane. Put your throttle to the high/full throttle position on your transmitter....Leave a comment:
-
Certainly gluing them permanently in place would prevent them from folding but you must ensure you're using some very strong glue like Epoxy. There is...Leave a comment:
-
Now that is bad news! I wonder if it would have been better off just to glue the wings in the lock position and leave them that way permanentlyLeave a comment:
-
Little late to the party but here’s mine!...Leave a comment:
-
WANTED: FMS BF-109 1.4m
Looking for one of these discontinued birds. Looking for one that is new or used but in good shape, though I’m open to a lot. Price very negotiable,... -
Since I don't have a pic of it with the idler off, this is what the idler mount looks like. The curved bar is probably 10mm wide x 7mm deep which won't...
Leave a comment:
-
Hi Elbee: I just ordered a spool of grey TPU filament from Amazon to experiment with using it as a lighter and more flexible (and survivable from dropping...Leave a comment:
-
I have the files for the IS-3 I think you are going to order. I'll send you a pic of the idler mount. It looks decently strong. I haven't gotten around...Leave a comment:
-
My first German figure, modified the original paint job somewhat, just waiting for the go ahead from Ed regarding the colors.
Since these pics,...Leave a comment:
-
My thoughts exactly.Leave a comment:
-
Fascinating! What didd you do to strengthen the idler assembly? (Did I miss that in an earlier post?) I’m planning on buying a 3DP IS-3, and that is...Leave a comment:
-
In the last two years we have been invited to the National Mounted Warrior Museum (https://history.army.mil/Army-Museum...-an-Army-Museu...Leave a comment:
-
Bene ottimo a sapersi mi fa piacere per te e ti ringrazio per quando avrò il mio f 35 grazie ciaooLeave a comment:
-
Good. CG might be a bit different after all the changes to it with the crash, and subsequent repair might shift it a bit.
Davegee...Leave a comment:
-
I have fixed it! Let me share, if someone faces it. So, as you know the throttle wire has an Y split: one goes to ESC, another to the afterburner light....Leave a comment:
-
Good looking little airplane!
There was a cutout hole on the floor of the nose, I think you may have put the weight there and then mounted the gunner...Leave a comment:
-
Ciao una cosa magari già provata sembrerebbe tu lo abbia in programmazione. Magari invertendo da radio l acceleratore? Chissà, ma attenzione...Leave a comment:
-
Friends!
I assembled F-35 today. But it was a disappointment to fail to set up the ESC / Throttle control. I use Spektrum receiver AR10100T with...Leave a comment:
-
I used 5000 mAh batteries exclusively on the B-25. I did find a small weight, about 0.7 ounces that must have been in that forward cockpit area somwhere,...
Leave a comment:
-
Grossman56,
It is a very nice bi- plane. Lots of scale detail OEM. If it fly's well it will be worth putting time in on more details. A senior...Leave a comment:
Leave a comment: