Announcement
Collapse
No announcement yet.
Roban AH-1W Cobra 700 Size Scale Helicopter
Collapse
X
-
Man thats nice! Looks scale and sounds good too. What are you powering it with?Originally posted by DCORSAIR View PostSorry for the bad video, had no one to hold the camera.
Comment
-
Powering as in motor?, It has a Scorpion 530kv as for motor, KST HV 1035 tail servo, MKS 1220 cyclic servos, Kontronik 160 ESC, Futaba 6303R SBus rx with a Microbeast FBL controller, all stock kit and this is the older kit with the single bearing lever control arms to swashplate, got it dialed in nicely and very easy to fly.Originally posted by Clugh View Post
Man thats nice! Looks scale and sounds good too. What are you powering it with?
- Likes 1
Comment
-
Thank you for your reply. Yes, I was wondering about the e power . What series 530Kv. How many cells and what is the average runtime? If you do not mind me asking.Originally posted by DCORSAIR View Post
Powering as in motor?, It has a Scorpion 530kv as for motor, KST HV 1035 tail servo, MKS 1220 cyclic servos, Kontronik 160 ESC, Futaba 6303R SBus rx with a Microbeast FBL controller, all stock kit and this is the older kit with the single bearing lever control arms to swashplate, got it dialed in nicely and very easy to fly.
Comment
-
Oh no problem, 4035-530kv, running on 12 cells, around 5-6 minute flight times and land around 3.85v per cell and that's with my old Gensace 60c 5000mah packs, haven't tried my new HRB 5000 100C packs yet so I'm sure I will get even better flight times with those. I don't know my head speed, I just go by the sound I hear and how the heli responds to my stick position, been doing this a long time so I don't calculate anything.Originally posted by Clugh View Post
Thank you for your reply. Yes, I was wondering about the e power . What series 530Kv. How many cells and what is the average runtime? If you do not mind me asking.
Its been a few months since I have flown it, time to get her down and take it up for a few sorties.
Comment
-
Not to go too far off topic but what did you run before the egodrift? did you see improvements? Vincent makes a nice motor but I haven't rewound one yet because I was not able to acquire a raw stack and didn't want to tear a good motor down. What ws the average amp draw and what were the peaks you saw.Originally posted by sfcfury View PostI'm using the Egodrift 4525-515Kv and usually have 5500 to 6000mah packs (12S) and my timer is set to 8 minutes. I have very slow spool up... so It's about 7 minutes of 'semi-aggressive' scale flight... When I land I usually am at ~3.7v per cell.
Comment
-
Sweet, you seen mine already I'm sure, but I will try to get a recent video uploaded that I did over the weekend, I have the same one and yours looks to be flying well.Originally posted by Shaun Evans View Post
Comment









Comment