You're welcome. I had to remove the location of the MFCB and place it further aft, then trim away some of the canopy foam to get my heavy battery onto the wooden plank that the MFCB was on, but that was necessary for my 870g battery to achieve the CG I wanted. Motion RC's 6S 5000mah LiPo is roughly 135g or so lighter than my LiPo. I didn't have any elevator trimming on the maiden flight (only aileron) and the elevators are set completely level with the fuse line next to it. During inverted flight, very little pressure on the gimbal was necessary to remain in the level flight.
-
-
T-33 gaggle at the AZ Electric Festival. 8 in the air at one time!
PatComment
-
When I fly down to see my daughter. They pick me up at the Mesa Airport. Here in SD to find a nice place to fly I just go to one of our local Air Ports and they let me fly my Jet's, and a few small Air Ports in Wyo. Upton, Newcastle, Hulet ( up by Devils Tower) Belle Fouche SD Martin SD. There are no suitable pave runways here in Western SD. I do belong to many clubs in a 200 mile radius and when I can I fly over in Gillette Wyo. When I was working for Cat a few years back I flew a lot in Riverton Wyo. They let me leave my trailer full of planes at their Field, and became one of there main Instructors During the 2 years I was over there. I would love a place like the field you guys have that is an awesome place.Comment
-
Pat, that looks like an amazing event, lots of fun, and a great field. Some day I would really love to go. It's on my to-do list for sure.Comment
-
Ha-ha, I love it! It sounds like the turnout was phenomenal and I'm enjoying the videos. Good luck on next years event and all others to continue its growth and popularity.Comment
-
My son, the wife, and I got out there on Sunday. Unfortunately a day late and a few pilots short, but still enjoyed our time there. Met Justin as he was burnin down his batteries before departing for home. Yes, it was still pretty much a Jet Fest at that time. In fact didn't see any props on the flightline. Was good to see the T-33 up close and in person. Will try to make it out on Saturday next time. Had to check out this new XFL football league that started this weekend and totally spaced out the event until later that evenin.Dynam; E-Flite; FreewingComment
-
Very cool. And I thought 6 A-10's at E-jets last year was busy! How wide is that runway anyway? Be hard to take off together like that at either Jet Jam or E-jets!
Pete
PS. Anybody know when they are expected back in stock?Comment
-
Our runway is 700' long and 60' wide not counting the taxiway. One of the nicest fields in the southwest, and probably a Top 10 nationwide.PatComment
-
We usually have several flyers come out to your field for the festival. This year just wasn't in the cards for me.
Come on out to Albuquerque sometime. Between Balloon Fiesta Park, and Maloof Airfield we are incredibly lucky . Year round flying great weather. Our problem is we our nowhere near anything so we are under appreciated and don't attract large events..
Maloof from above. One of the oldest airparks in the country. 800ft long just resurfaced by the city. Plenty of room for turbines and any other model.
Comment
-
My sister lives on the other side of Sandia mtn... I get there a lot, just a couple weeks ago.. I need to check your site out.Comment
-
That group T-33 flight was awesome to fly in!
I've already got plans for my re-paint.Comment
-
Still have to finish painting the nose and apply the graphics, but I am very pleased at the way it is coming along. The colour is off because of the fluorescent lights. Still amonth before the field is free of snow so no rush.Attached FilesComment
-
-
Excellent Daiglo looking great!Comment
-
Has anyone installed an Admiral RX600SP Gyro receiver in their T-33? Interested to see where and how you placed it. Pics would be greatly appreciated if possible.
Thanks,
TonyComment
-
Although mine is not an Admiral RX600SP, it is still a gyro receiver. I made a small solid shelf out of thick styrene to ensure no flexing and movement during flight, and any wires down below it are also now secured (especially the ESC power leads) so they do not knock into the shelf when inverted, etc. I hope this helps. Some people had room to place their gyro where the blue MFCB was, but I couldn't due to how far I had to move my heavy LiPo back.Attached FilesComment
-
-
I'm using that admiral gyro receiver in my T-33. I also added a wooden shelf behind the bluebox and placed the admiral on it. I did place the shelf a little bit too far aft and the servo cables from the bb coudn't reach my receiver, so I rotated the bb 180 degrees to solve my problem.
This is not my picture but my installation looks very similar:
Comment
Comment