Official Freewing 70mm F-16C Falcon V2 Thread

[dahawk]

Thanks Ray!

yeah the slight amp draw penalty we pay on the 14b is offset by higher performance and better sound. Get mine pre-balanced from Elmer @ edf hobbies. 100 amp esc.

Glad your liking the RT's. My new best friend for lipos. That 5800 35 C is a good performer. Helps to have Andy here in Texas.

The struts were a nice adder? Think I'll order the arf plus with struts , and add the 2200kv XRP combo w/100 amp esc.

Cheers,

Hawk

[gooniac33]

Anyone go with the 13B XRP combo? I have the 14B XRP 2200 in my Yak-130 with 100amp esc. and the sound is the best in my squadron. Was thinking about ordering the the Arf+ and going with the XRP package and struts,

There are a couple videos of the plane with the 13 blade and it looks really good! Not sure on the specs but it has to be slightly less draw than the 14 blade. I use the 14 blade with 2200kv inrunner and love it! Vertical performance is insane and the speeds are up quite a bit from stock. My fave pack to run in the plane is a Roaring Top 6s 35c 5800mah. It has made this thing even more of a rocketship!

[Alpha10]

Anyone go with the 13B XRP combo? I have the 14B XRP 2200 in my Yak-130 with 100amp esc. and the sound is the best in my squadron. Was thinking about ordering the the Arf+ and going with the XRP package and struts,

Most of us are... It's a great fan and surprisingly, it's just as efficient as the V3 10b with better sound.

You can't beat it with a quality inrunner.

[dahawk]

Anyone go with the 13B XRP combo? I have the 14B XRP 2200 in my Yak-130 with 100amp esc. and the sound is the best in my squadron. Was thinking about ordering the the Arf+ and going with the XRP package and struts,

[Aros]

I am still enjoying this jet more than any other in my fleet at the moment. Just a treat from takeoff to touchdown.

[gooniac33]

I just installed the final parts to the landing gear. I now have complete oleos all around now. The nose gear alone made a huge improvement in the way it handled. So I am really looking forward to how it will be with them all around. Minor trimming needed on the plastic covers but nothing major. I will try it out tomorrow

[Felixs10]

I'll post the results of the gear swap on the 70mm F104 thread...airframe is supposed to be here Thursday.

Awesome !

[scooter genie]

I was was thinking about doing the same for my 104 .. let me know how it works out ...

I'll post the results of the gear swap on the 70mm F104 thread...airframe is supposed to be here Thursday.

[gooniac33]

Ray,
Have you tried taking off on your narrow dusty trail with this plane?

Hawk

I am sure it would do it but I haven't been flying there. I have an actual runway to fly off of now so don't head out that way very often anymore.

[gooniac33]

hey gooniac, enjoyed your video on picnic table fan balancing....never occurred to me to use electric tape inside the spinner. a lot easier than mixing epoxy and cabosil ! Thanks.

Glad I could help! I am a keep it simple type of a person...

[dahawk]

Ray,
Have you tried taking off on your narrow dusty trail with this plane?

Hawk

[Felixs10]

I ordered a set couple of weeks ago. Got them and they look great. The set was out of stock, but I ordered each one separately. costs 5.00 more if you do it that way. Going to use them in my F104.

I was was thinking about doing the same for my 104 .. let me know how it works out ...

[Aros]

Thanks! Yeah I am actually seriously considering turning her into a belly lander...

[scooter genie]

hey gooniac, enjoyed your video on picnic table fan balancing....never occurred to me to use electric tape inside the spinner. a lot easier than mixing epoxy and cabosil ! Thanks.

[gooniac33]

Sorry, only 3.98 difference in price between the set, and ordering them separately. Not 5.00 Worth it to me instead of waiting for a re stock on the set. They are still available too.

I got the nose gear first. Since it worked so well I ordered the others... I could have just done the package when it was in stock... but oh well.

[scooter genie]

Sorry, only 3.98 difference in price between the set, and ordering them separately. Not 5.00 Worth it to me instead of waiting for a re stock on the set. They are still available too.

[scooter genie]

I am still waiting for the upgraded gear to come back in stock so I can grab them. My stock gear is toast.

I ordered a set couple of weeks ago. Got them and they look great. The set was out of stock, but I ordered each one separately. costs 5.00 more if you do it that way. Going to use them in my F104.

[Alpha10]

Still have yet to maiden my 70mm 6S Pro. It's got the gear upgrade, but grass ops with those really small wheels has me a bit hesitant. I don't think TO will be a problem. It's the landing that has me concerned:Confused:

Just run it without the fins and belly land it man... Done deal.

Save the stress and room for error... Not worth it IME.

F-16s and F-18s flare SO nicely for belly landing too...

[Aros]

I am still waiting for the upgraded gear to come back in stock so I can grab them. My stock gear is toast.

[Twowingtj]

Still have yet to maiden my 70mm 6S Pro. It's got the gear upgrade, but grass ops with those really small wheels has me a bit hesitant. I don't think TO will be a problem. It's the landing that has me concerned:Confused: