Official FlightLine 1600mm P-51D Mustang Thread

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • davegee
    replied
    Got another test flight in with the big "paper" 110 gallon drop tanks today. Got a late start, and the weather and winds were closing in fast. I decided to try to get another test with the drop tanks on, and made it in, by the wire. Started to rain after I got back down.

    Regarding the test of the tanks, they did great, and last night I added a rectangular wood piece glued in at the bottom of the tank and extending up to where the rear plunger on the pylon would compress on it when the tank is installed. That worked perfectly this time, with both tanks landing within 3 feet of each other. One tank was undamaged in the fall, and the other broke up some, especially the center tube section which is pretty thin. I think we'll print another center section that is a bit more robust, but not too much heavier than what I have been flying. I think the tank can be repaired and used for more testing. The other one is good to go. That makes 21 flights so far on this new airplane.

    Cheers

    Davegee

    Click image for larger version  Name:	IMG_3872.jpg Views:	4 Size:	184.2 KB ID:	451913

    Leave a comment:


  • nuts-n-volts
    replied
    If I remember correctly, that was the because the resin used was not fuel proof (how many are?). Yeah, there was a limited timeframe.

    Leave a comment:


  • davegee
    replied
    Originally posted by f4u ausie
    Back to the paper tanks very quickly... I read somewhere. That they did not fill with fuel ⛽ ⛽ till the last minute. Or they started leaking b4 takeoff
    I suppose that was probably true, Craig. One good thing about the paper tanks too, is that if they had a lot of gas in them when the pilot had to pickle them off from the wing mounts, the tanks would totally shatter when they hit the ground and spread all the fuel around in the field so the Germans couldn't use it for their side!

    Leave a comment:


  • f4u ausie
    replied
    Back to the paper tanks very quickly... I read somewhere. That they did not fill with fuel ⛽ ⛽ till the last minute. Or they started leaking b4 takeoff

    Leave a comment:


  • davegee
    replied
    Originally posted by nuts-n-volts
    I'm president of the club down here in ABQ that flies outta Balloon Fiesta Park. Just flew there this morning! We are really lucky to have such a great field. Yeah, I gotta get back up to Colorado and check out some of your museums. You guys have some very nice ones.
    It's been a goal of mine in life to get down for the Albuquerque Balloon Festival someday. We've driven past it on trips down to NM but it wasn't at a time they were doing any of that. But I do follow it often when they put up such beautiful and amazing balloons launching each year. I'm envious that your airfield is located in such a cool area. We have (I had) a wonderful field in the south Denver metro area in Chatfield State Park. It has a very large, well-run club and excellent facilities and activities. I say "had" since we left Denver 7 years ago and I haven't really been back since, to fly.

    Here in Cody, WY we have a modest airfield which is probably adequate for our needs. There are better fields like in Billings, MT, which is about 1 1/2 hours away.

    Cheers

    Davegee

    Leave a comment:


  • nuts-n-volts
    replied
    I'm president of the club down here in ABQ that flies outta Balloon Fiesta Park. Just flew there this morning! We are really lucky to have such a great field. Yeah, I gotta get back up to Colorado and check out some of your museums. You guys have some very nice ones.

    Leave a comment:


  • davegee
    replied
    Originally posted by nuts-n-volts

    Thanks Dave, I try. I like all your scale posts as well.. Always great info!
    Have always loved NM, being our southern neighbor from Colorado where I spent most of my life until we moved up to northwest WY 7 years ago. We vacationed and camped in NM over the years, great place in America to see. One of my friends moved to Santa Fe just a few years ago from Denver and really likes it down there.

    Happy Flying!

    Davegee

    Leave a comment:


  • nuts-n-volts
    replied
    Originally posted by davegee

    Yes, from the Bowater-Lloyd company in England. Dan made the design to look like the paper tanks. Also made 108 gallon tanks some paper, some steel. I think most of the steel tanks came from the USA.

    Good eye! Most people wouldn't know that! Appreciate your post, nuts-n-volts. I like the work you do on rc models.

    Davegee
    Thanks Dave, I try. I like all your scale posts as well.. Always great info!

    Leave a comment:


  • davegee
    replied

    Below is a photo taken in 2018 while I was building a CARF 1:4.5 scale P-51D for the Mighty Eighth Air Force Museum in Pooler, GA. I was commissioned to build a permanent display of the USAAF Scouting Forces in WWII. These were former bomber pilots who volunteered to fly these special missions after they had completed their combat tours and could have gone home. I had a good friend no longer with us, Lt. Col. Bill Getz, who volunteered after he had flown 31` combat missions as a B-24 pilot. The model plane I built is painted up in his colors, Saucy Shirley, after a girlfriend who promptly dumped him after he left for war!

    I plan on adding this scale piping detailing to my model I flew yesterday. It's all scratchbuilt, as is the printed tank from a friend of mine. One interesting thing if you look at the tubes near the back of the tank is a clear section. That on the real plane was glass (clear vinyl for my model) to ensure that the tank would break cleanly away from the airplane when jettisoned in flight. I thought that was pretty heads-up work for 80+ years ago!

    In memory of Lt. Col. Bill Getz and all the 100 Scouting Forces members in WWII. Bill was the last one standing, and he wanted a permanent reminder of what all the Scouts did in WWII. He passed away a couple years ago at 99 years of age.

    Click image for larger version  Name:	Photo_2026-08-12_140547.jpg Views:	0 Size:	133.4 KB ID:	451870

    Davegee

    Leave a comment:


  • davegee
    replied
    [QUOTE=davegee;n451859]

    Hi Dan: great job on designing the 110 gal. tanks. I have a few little adjustments to make to be sure they separate cleanly when commanded to as the bombs and the OEM foam drop tanks do. I'm sure I can get them to work as well as the others did. At the least, it flew well on the airplane.

    I was thinking, those pilots that flew the long range missions didn't have much maneuverablilty with those tanks on, and the moment they contacted enemy fighters, they would want to immediately punch off those tanks to be able to fight the enemy on their own terms. That's how I felt with the big tanks on, if I had had Any issues at all with them on, I was ready to flip the switch immediately to jettison them!

    Cheers


    Leave a comment:


  • davegee
    replied
    Originally posted by nuts-n-volts
    You guys probably know this... The 110 gallons were made out of craft paper to save aluminum.
    Yes, from the Bowater-Lloyd company in England. Dan made the design to look like the paper tanks. Also made 108 gallon tanks some paper, some steel. I think most of the steel tanks came from the USA.

    Good eye! Most people wouldn't know that! Appreciate your post, nuts-n-volts. I like the work you do on rc models.

    Davegee

    Leave a comment:


  • nuts-n-volts
    replied
    You guys probably know this... The 110 gallons were made out of craft paper to save aluminum.

    Leave a comment:


  • davegee
    replied
    Originally posted by Grossman56
    Those tanks look absolutely great!
    There's a picture of a guy holding on over his head in one of my Mustang books, shows how light they were.
    Click image for larger version  Name:	papertank4a.jpg Views:	0 Size:	33.0 KB ID:	451858

    Grossman56
    (Dangerous Dan)
    Hi Dan: great job on designing the 110 gal. tanks. I have a few little adjustments to make to be sure they separate cleanly when commanded to as the bombs and the OEM foam drop tanks do. I'm sure I can get them to work as well as the others did. At the least, it flew well on the airplane.

    I was thinking, those pilots that flew the long range missions didn't have much maneuverablilty with those tanks on, and the moment they contacted enemy fighters, they would want to immediately punch off those tanks to be able to fight the enemy on their own terms. That's how I felt with the big tanks on, if I had had Any issues at all with them on this first test flight, I was ready to flip the switch immediately to jettison them!

    Cheers

    Dave

    Leave a comment:


  • Grossman56
    replied
    Those tanks look absolutely great!
    There's a picture of a guy holding on over his head in one of my Mustang books, shows how light they were.
    Click image for larger version

Name:	papertank4a.jpg
Views:	179
Size:	33.0 KB
ID:	451858

    Grossman56
    (Dangerous Dan)

    Leave a comment:


  • davegee
    replied
    Originally posted by handyman220
    I just received the 3D cockpit kit, it a work of art, better than I expected!
    Excellent! I'm sure a bunch of us would love to see some in-progress photos of your work as you put it together. I'm thinking of ordering a stock cockpit and then the detailed interior to have two cockpits I can use for this airplane. The stock airplane cockpit isn't "bad" but it can be so much better with this cockpit kit!

    Regards,

    Davegee

    Leave a comment:


  • davegee
    replied
    Originally posted by jetfool
    Davegee,
    Great test of bombs and tanks. You should be one of Motions flight test eng. for future projects. If the planes fly great at your elevation they would fly anywhere.
    Good Job, Rex
    Yes, that's true. Higher altitude definitely affects aircraft of all types. I can tell that because of the thinner air, the True Airspeed (TAS) is higher and can make landings "sportier," for instance.


    I can remember many years ago when we used to fly 727s into the old Denver Stapleton Airport, (5,300' MSL)you could definitely feel the faster speed over the ground because the true airspeed was higher, maybe 10% so, from landing at sea level. It made for some "interesting" approaches sometimes!

    Cheers

    Davegee

    Leave a comment:


  • handyman220
    replied
    I just received the 3D cockpit kit, it a work of art, better than I expected!

    Leave a comment:


  • jetfool
    replied
    Davegee,
    Great test of bombs and tanks. You should be one of Motions flight test eng. for future projects. If the planes fly great at your elevation they would fly anywhere.
    Good Job, Rex

    Leave a comment:


  • davegee
    replied
    Thanks, Danger Dan Gross did all the designing for them, he should take a lot of the credit! I have to work on some minor issues to better separate the tanks from the pylons when commanded. On the OEM pylons, they have one release clamp in the front and nothing in the back. I suspect an angled moment in the rear of the pylon might have had it hung up even though the front release probably worked. I'll come up with something and then try it again. The OEM pylons have two spring-loaded plungers that are under load when the ordnance is attached. Once the release is commanded from the transmitter, the plungers help give it a downward push for it to clear the airplane. It works fine on the bombs and the OEM foam drop tanks, but the large 110 gal. tank needs a little work to function properly.

    Leave a comment:


  • f4u ausie
    replied
    Wow those tank look the real deal.. very nice 🙂

    Leave a comment:

Working...