Thanks! Not scale at all but I think they're better than the factory DynaBots :Cool:
Announcement
Collapse
No announcement yet.
Official Dynam 1500mm B-26 Marauder Thread
Collapse
X
-
And replacement is complete. The nose gear was a complex operation as not only did I have to get the steering system setup, but also I had to redo the mounting plate for it as well. Basically using the plate from the original retract unit and epoxing it on to the freewing set. Then drilled some holes and used the screws that bolted on the plate to the original retract. Finally having to cut the old mounting tabs off the new unit so the steering system would clear. But it's finally complete. Thank goodness
Comment
-
Looks like my mains took a dump tonight, one stopped working completely while the other is making a jerking and then the gear starts to grind..
Asked for help from Motion RC and see what they said before I have to drop some money on some from Hobby King.. so the wait begins..Just let me fly so I may be free
Comment
-
Bearcat i had a main act the same on my second flight. I notified motion (opened a warranty claim)and had a free replacement in two days. You must be within the 30 days from reciept window though.( If only marrage had the same warranty..i realized my ex was defective in the first two weeks.) My replacement has been working fine since (30ish flights). The other original main failed the same way a few weeks ago well out of warranty. Im going to stick with the dynam retracts for now in the hope that the replacements are improved in some way. If anyone finds a drop in replacement i would consider it. My failures had nothing to do with temp.Still flying P.15, avanti(#2), mig 21, yak 130 70mm(#2), f35, f9f panther, a10 64mm, F8 crusader/ PA ultimate amr /HK skipper, durafly dh vampire, p 51,spit mk24, corsair, flybeam/ BH f86 50mm, deltawing 50mm/ HH su 26 mm,umx pitts,umx sbach, blade nano cp s,blade 450x, inductrix 200, inductrix pro, umx yak 54,umx f27 fpv/ electrifly 4s L39/ flyzone beaver/ volantix asw 28, /dynam B26
RIP.. roc hobby waco,strega #2(you will be missed), Fw 90mm eurofighter.
Comment
-
Originally posted by Bearcat View PostLooks like my mains took a dump tonight, one stopped working completely while the other is making a jerking and then the gear starts to grind..
Asked for help from Motion RC and see what they said before I have to drop some money on some from Hobby King.. so the wait begins..
Not happy with the retracts at this point..but I seem to remember I had the same issue with my A-10 a few years ago.. I still have the same retracts but weather dictates when I fly her..Just let me fly so I may be free
Comment
-
Well damn....I didnt want to believe that the dynam retracts have a low temp issue but..i finished replacing my failed port main with another new dynam retract(stbd failed on second flight,motion sent replacement,love you motion!) Flew two flights yesterday temp 47F. 1st flight (from car to tarmac) no problem. 8min flight. Second flight new port main failed to drop. Cycled again and waited,gear dropped after 5-8 second delay. On the ground..same thing stbd main,nose gear working fine,port gear only after delay. At home at room temp...no issue. (My ex wife didnt work when she was cold so i replaced her. )Anyone know of a drop in replacement?Still flying P.15, avanti(#2), mig 21, yak 130 70mm(#2), f35, f9f panther, a10 64mm, F8 crusader/ PA ultimate amr /HK skipper, durafly dh vampire, p 51,spit mk24, corsair, flybeam/ BH f86 50mm, deltawing 50mm/ HH su 26 mm,umx pitts,umx sbach, blade nano cp s,blade 450x, inductrix 200, inductrix pro, umx yak 54,umx f27 fpv/ electrifly 4s L39/ flyzone beaver/ volantix asw 28, /dynam B26
RIP.. roc hobby waco,strega #2(you will be missed), Fw 90mm eurofighter.
Comment
-
Originally posted by CFIT rob View PostWell damn....I didnt want to believe that the dynam retracts have a low temp issue but..i finished replacing my failed port main with another new dynam retract(stbd failed on second flight,motion sent replacement,love you motion!) Flew two flights yesterday temp 47F. 1st flight (from car to tarmac) no problem. 8min flight. Second flight new port main failed to drop. Cycled again and waited,gear dropped after 5-8 second delay. On the ground..same thing stbd main,nose gear working fine,port gear only after delay. At home at room temp...no issue. (My ex wife didnt work when she was cold so i replaced her. )Anyone know of a drop in replacement?
Comment
-
Originally posted by CFIT rob View PostWell damn....I didnt want to believe that the dynam retracts have a low temp issue but..i finished replacing my failed port main with another new dynam retract(stbd failed on second flight,motion sent replacement,love you motion!) Flew two flights yesterday temp 47F. 1st flight (from car to tarmac) no problem. 8min flight. Second flight new port main failed to drop. Cycled again and waited,gear dropped after 5-8 second delay. On the ground..same thing stbd main,nose gear working fine,port gear only after delay. At home at room temp...no issue. (My ex wife didnt work when she was cold so i replaced her. )Anyone know of a drop in replacement?
Comment
-
Got word from MRC customer service...cold weather is an issue dynam is working on. They gave me a possible eflite drop in. The EFLg1590m from their 1225mm birds. A reviewer on mrc site for those retracts said they dropped in his tempest. The B26 mains are same part as the tempest. No idea for nose gear yet. Will try loosening the screws first. Thanks for the suggestion.Still flying P.15, avanti(#2), mig 21, yak 130 70mm(#2), f35, f9f panther, a10 64mm, F8 crusader/ PA ultimate amr /HK skipper, durafly dh vampire, p 51,spit mk24, corsair, flybeam/ BH f86 50mm, deltawing 50mm/ HH su 26 mm,umx pitts,umx sbach, blade nano cp s,blade 450x, inductrix 200, inductrix pro, umx yak 54,umx f27 fpv/ electrifly 4s L39/ flyzone beaver/ volantix asw 28, /dynam B26
RIP.. roc hobby waco,strega #2(you will be missed), Fw 90mm eurofighter.
Comment
Comment