Hey Y'all, Fuselage_3 completed and had some thin spots of the 'thin' wall construction. Chatted with 3Dlabs forum guys and it is not unusual so I will 'press on'. The structure of this is quite fascinating to me, though I am easily entertained. I have looked on MotionRC's site and I am thinking the F-4 90mm setup is the way to go here, but are all 90mm EDFs 8s? The recommended setup is 90mm EDF and a 1750Kv motor with a 100+ amp ESC. I'm in the learning curve just hiding behind the door. Any help here would be appreciated. Best, LB
Announcement
Collapse
No announcement yet.
Official 3DP Thread
Collapse
X
-
Originally posted by rifleman_btx View PostWow, that looks good,:Cool: what do you use for adhering the media to the bed?
Last edited by Elbee; Nov 2, 2018, 08:56 AM. Reason: Misspelled a word and added a space for the URLI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 2
Comment
-
Originally posted by Elbee View Post
RBTX, Thanks, I started out using the glue stick that came with the Prusa kit, which was just like Elmers Xtreme as far as I can tell. There is another better product called 3D Gloop www.3dgloop.com which works even on glass but leaves a residue. I have used both and these work. However, I have the Powder-Coated TXT Spring Steel heat bed sheet which once it is broken in no longer requires an adhesive. I clean it with acetone before each print and I scuffed it up before I printed my 2nd print as I had a problem with adhesion at first. Pic is Fuselage_4 the largest piece so far. Best, LB
Comment
-
Originally posted by rifleman_btx View PostHeres my first print with this thing! Extremely pleased!!!I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
This is fun to watch. Nice work fellas!My YouTube RC videos:
https://www.youtube.com/@toddbreda
- Likes 1
Comment
-
RBTX, I like HO Scale, just difficult to RC gear in the airplanes. Fuselage_6 added. Tammes said, "It's getting so big." Cracked me up as my mind went immediately to the gutter. LOL I've said too much and she is just a champ for putting with me. Anyway, Best to all this Sunday AM and "Go Chiefs", LB
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 4
Comment
-
Very cool!!!! My Freewing 80mm is still in the box. Now we have new powerplant options which should make it sweeter!!!! But the 3D printing intrigues me. I was an instructor for SHARP electronics and taught copiers, printers and fax machines.... Color copiers were complex, but the 3D thing is something I will add to my skillset very soon!!! Looking really cool LB!!! I like it when the girls comment on size too.... (of the planes and storage spaces) ;)
Comment
Comment