Official Freewing 70mm F-16C Falcon V2 Thread

[Suprawill1]

Leave the ESC, where it is is a good place in air flow for cooling. Moving it you'll need to do a lot of soldering too.

Agreed. It's where it is because of the cooling factor but I may have to move it forward if there continues to be a balancing problem. It was a hard decision between the two places because there were other concerns. Besides the balancing, it's prudent to have the motor wires long and the batt wires short. That way I wouldn't have to add caps.
Not afraid to solder but there's also crimp connectors.

[kallend]

70mm RC Lander 2200kv EDF and a 100A ESC. Another difference is that I have a 3200mah which is probably lighter than the 4000 pack. A 4200 is on the way but in its own right is a bit light for its amperage. 440.4g as opposed to the 3200's 394.8.

Well, there you go. No doubt that's why you're having a CG problem.

[Suprawill1]

Well, there you go. No doubt that's why you're having a CG problem.

Not sure which case you're referring to. The ESC, the EDF, the battery, the position of the ESC?

[Suprawill1]

So, it seems I will have to relocate the ESC to the front to get a practical CG. The heaviest battery I'm going to use will almost get the right CG and that's moved as forward as possible. Don't mind doing this but I won't get the airflow I would in back. Not too worried about that though because it was forward in the V1 F-16 I had these components in and there were no ESC heating problems.

[rms]

My Fw F16 with very high perfmance, dis som mods to it..

https://www.youtube.com/watch?v=2ZbioteRpcQ&t=2s

[rms]

https://www.youtube.com/watch?v=2ZbioteRpcQ&t=2s

[Suprawill1]

Nice flight! What did you do to create more airflow to the fan?

[Airguardian]

[Icarus the 2nd]

I didn't find a thread for the eFlite F-16 70mm so here's a flightvideo of mine which I repainted into a Japanese F-2.

The video was recorded during a really nice EDF meeting in Venlo (NL) some weeks ago.

Enjoy!

[kallend]

I didn't find a thread for the eFlite F-16 70mm so here's a flightvideo of mine which I repainted into a Japanese F-2.

The video was recorded during a really nice EDF meeting in Venlo (NL) some weeks ago.

Enjoy!

Nice, and nice afterburner!

[paulrkytek]

I didn't find a thread for the eFlite F-16 70mm so here's a flightvideo of mine which I repainted into a Japanese F-2.

The video was recorded during a really nice EDF meeting in Venlo (NL) some weeks ago.

Enjoy!

Good looking F16 and smooth flying. Earlier this year I put aside my F16 in favour of other models but my uprated suspension arrived yesterday so its now ready for a re maiden on Monday. FMS 70mm 12 blade 3060 1900kv fan and flaperons. I use take off flaps off our grass runway.

[Cecil]

https://www.youtube.com/watch?v=2ZbioteRpcQ&t=2s

Marvelous flight. Skilled pilot. Wanna see more flight video.

[paulrkytek]

Maiden flight of my F16 70mm today.

https://www.youtube.com/watch?v=OgwHHe_Lk4g

[Iamrcpilot]

Unlimited vertical wow.
Was asking if anyone knows is the FMS and the e-flite F-16 70mm the same foam airframe, are the parts interchangeable?

[Evan D]

Oh, I think so. The FW is not.

[Iamrcpilot]

That is what I though. I remember hearing that on a H.H. Video.

[Evan D]

The video was of the FreeWing one. I didn’t see unlimited vertical in the video, did I miss something?

[Iamrcpilot]

Yes that was a Freewing. The H.H. Video was for the Eflite F-16. It was a release video I think.

[paulrkytek]

Unlimited vertical wow.
Was asking if anyone knows is the FMS and the e-flite F-16 70mm the same foam airframe, are the parts interchangeable?

Not the same airframe, See Merry Boozer comparison video

https://www.youtube.com/watch?v=9SQmOqYrMBg

[Airguardian]