Good morning people. Can you tell me where you are getting these props please ? I got a 8x8 em apc from them. And to run the six cell setup what. ESC are you running ? Please let me know thanks giddyuperic@gmail.com
Announcement
Collapse
No announcement yet.
Official Skynetic 1000mm Havok Racer Thread
Collapse
X
-
All stock with an APC 7x7E prop. I don’t think it’s the prop causing the left roll. It’s the speed. I was able to get the left roll in a power dive on 4s. I’m going stiffen the fuse laterally and square up the wing saddle. May do gap seals on the ailerons, one of my aileron servos has some play in the gears so that might be causing the roll.
Anyway my roll isn’t so bad that it can’t be controlled and might help in a pylon race. Like a NASCAR racer always wants to turn left on the straights. Moving a foamy through the air above 140, bad things could happen...1 Photo
Comment
-
Originally posted by TaSaJaRa View PostWeather wasn't good for flying today , So I designed some servo control arm covers. Turned out pretty good... I will have to check all the clearances Monday to see if they really came out with enough room.
Printed in Esun PLA+, 100% infill, .2 layer height.
Comment
-
Originally posted by James View Post
They look awesome TaSaJaRa! Can you extend the sides so they fully cover the black on the servo?
Sure I can adjust it a bit...Printing the 3rd design now. Made the crown slightly thicker and added 11mm to width...With a thicker center you will need a support
Will see how it turns out this time.
- Likes 2
Comment
-
Well got them printed, turned out pretty good. I will put them on Thingiverse if anyone would like to try them out.
I think I will use this Scotch Double Sided tape, it seems strong enough and it is very thin.(PIC Below)
You cave get the covers HERE: https://www.thingiverse.com/thing:4084704
- Likes 1
Comment
-
TaSaJaRa Thanks for sharing your design! I'm going to print out a pair of these today for my Havok. Luckily I just received more white PLA.Live Q&A every Tuesday and Friday at 9pm EST on my Twitch Livestream
Live chat with me and other RC Nuts on my Discord
Camp my Instagram @Alpha.Makes
Comment
-
micronracer Thanks for posting! The Skynetic Havok sold out much faster than we had anticipated, which I suppose is a good problem to have! More Havoks are on the way; the best way to be notified as soon as they are in stock and ready to ship is to enter your email address in the "Notify Me" field:
Havok Racer 1000mm (39") Wingspan - PNP from Skynetic - SKY1000-001 Motion RC is proud to announce Skynetic, a new brand of foam electric aircraft for newer pilots looking to broaden their flying experience across a range of RC airplane types. Developed by and available exclusively at Motion RC, Skynetic advances our v
Live Q&A every Tuesday and Friday at 9pm EST on my Twitch Livestream
Live chat with me and other RC Nuts on my Discord
Camp my Instagram @Alpha.Makes
Comment
-
Well had a no fly weekend again AAARRRGGHHH !!! So did a little more playing on TinkerCad.
I have been bothered by all the dead grass my Havok scoops up with the Lower Air Duct on ever landing. Darn thing acts like a shovel where I fly.
Always having to shake or rake it back out.
I designed a Duct Shield/Screen. It should still let plenty of air through, but not the grass.
Still need to clean up the holes a little more... The design will use one spot off CA to hold in place on the center bottom of the duct.
Have not got a chance to fly with it yet, but looks promising...
- Likes 2
Comment
-
Originally posted by champdavid96 View PostI'm I the only one breaking props when landing the Havoc? I've made solid landings and still breaking prop blades. Any suggestions please?
Comment
-
Originally posted by champdavid96 View PostI'm I the only one breaking props when landing the Havoc? I've made solid landings and still breaking prop blades. Any suggestions please?
I haven't broken one yet. My guess is you're just coming in pretty fast. First few landings on my Havok, I was shocked how long I could hold it right off the ground in a flair. Like James said, it will get crazy slow before it finally falls out of the air. Get it right over the grass and hold that flair as long as you can and bleed off all the speed. Shouldn't break any if you hit the ground slow.
Comment
Comment