New E-flite Fw-190A, 1.5m
Collapse
X
-
I took my Weiss 5 to the field today and sortied her four times, primarily shooting touch-n-goes. I wrote up my thoughts on landing this plane over on RCG. I won't rewrite that here, but here's the direct link to that post, if anyone is interested in reading my thoughts on what it takes to make decent landings with this plane.
In a nutshell, if you have poor landing technique (suck as try to glide in, or coming in too fast), expect ugly landings. This plane really wants to be 3-pointed, and is VERY unforgiving of less-than-perfect landings.
I did finally get my White 5 decals from Callie and got them on.

Leave a comment:
-
Here is my maiden flight of the FW190. Our club was swampy this morning so I went to the play field by a school I sometimes fly at. The grass was pretty tall but the plane handled it well. Much better than the old FMS 190. The video isn't much, just a gopro hat cam. Everything was setup by the book with CG at 110mm
Leave a comment:
-
-
My 1/7 scale nomenclature decals also looks a bit on the large size. I'm not too worried about it though.Leave a comment:
-
callie will fix whatever problems you tell her aboutLeave a comment:
-
Leave a comment:
-
-
an update regarding the customer service component of this airplane - I started a support ticket on Feb 16, received confirmation of the ticket on the 17th, and then received exactly zero support for a week. I contacted them again and they apologized, as well as ask me a few questions. They requested a video, which I sent on Feb 25th. Since then, they've gone dark despite a couple more emails from me asking if they still planned to address my issues. Still nothing.
Horizon does not impress me. Wow, I have to say this is surprising.Leave a comment:
-
-
-
-
Thank you it was a lot of fun to do. I'm almost thinking about getting another one to do a different scheme.
Rattle cans: I use a graffiti artist paint from Germany that you can find at any serious artist supply store called Montana Cans. The Black label is an lacquer based paint, the gold acrylic. These paints are dry and can mask with the purple 3M tape usually within 5-10min of spraying. You can also get different caps for fine to wide spray.
For RLM76 I used Montana Cans Black - Dove For RLM 04 Montana Cans Gold - Shock Yellow
For the white cowl Montana Cans Gold - Shock White.
For camo, I used AK Interactive Real Colors sprayed on via an airbrush
RC278 - RLM 74
RC278 - RLM75 RC265 - RLM02 for wheel wells and inner gear doors
The rest are water slide decals. Most decals were masked off and underpainted white before application.
Leave a comment:
-
-
Not all the markings are on, but it is otherwise ready.to maiden.
1 PhotoLeave a comment:
-



Leave a comment: