Official FMS 1500mm P-47D Razorback Thread

[davegee]

We were out of town for a couple of days and when we got back Callie's packet of vinyl transfers were in my mailbox. Although tired, I Had to put on at least a couple of them on the bottoms of the wings. My aircraft is very time specific and at the time I have "frozen" for the airplane's appearance, the left bottom wing was not painted but sported a big 55 inch diameter circle with the star inside. The right wing still had the standard 40 inch circle and star inside. There are invasion stripes on the bottom of the right wing, but none on the new, unpainted bottom of the left wing

Callie's work was again, beautiful! Lots more to do and then a LOT More to do once I get my converted bubbletop fuselage back from modifecation center in California.

Tomorrow I hope to reinstall the main landing gear and doors and start working on details like hydraulic lbrake lines and the shrinker bars that on the real airplane mechanically shortened the gear during retraction by 9 inches so it could fit in the wheel wells. Upon gear extension, the gear would increase by that same nine inches for prop clearance. Imagine, this technology was available over 80 years ago!

Cheers

davegee

[jetfool]

Davegee,
Your research into the timeline details have really paid off. Excellent work.
Dave, I used the plastic Googlyeyes from Walmart to make my landing lite lens. Thay come in several sizes in one package . Found in the craft area or crayon aera, don't remember A perfect lens shape
Best Regards, Rex

[Elbee]

davegee

Beautiful work, Dave, Master Class.

Best, LB

[davegee]

Davegee,
Your research into the timeline details have really paid off. Excellent work.
Dave, I used the plastic Googlyeyes from Walmart to make my landing lite lens. Thay come in several sizes in one package . Found in the craft area or crayon aera, don't remember A perfect lens shape
Best Regards, Rex

Thanks, Rex. For some modelers, Hairless Joe is like playing detective for scale fidelity because it went through so many changes in a short time. Imagine, within the space of a couple of months, having to replace both wings, the tail, the engine and other parts. I'm sure Schilling had an affinity for this aircraft, although it was one of several that he flew during his long combat career in Europe in WWII.

Eventually, Hairless Joe came to grief with another pilot at the controls after Schilling was pulled out of active combat status for the remainder of the war. There was an M model Hairless Joe, but I don't think Schilling ever flew that one, or if he did, it wasn't very much or often. Sadly, all 130 M models were scrapped at the end of the war. It was probably the best P-47 to come out of WWII. But jets were already being designed and tested, and Schilling pioneered jet fighter aerial refueling after the war flying non-stop flights over the Pacific and Atlantic Oceans.

Thanks for the tip on the "googly eyes." I know what you're talking about and will look for some at our local Walmart.

[davegee]

davegee

Beautiful work, Dave, Master Class.

Best, LB

Thanks, LB! Yesterday when we got back from a couple of days out of town, I looked through my reference photos and drawings, and came across one photo of Hairless Joe in 1944, which showed a slightly different lineup of the underwing invasion stripes. I did it as well as I could with photos and drawings that I had, but this period photo showed me that if I want to get it right, I have to respray and move the invasion stripes outward by the width of one stripe. At first I was thinking, "Nobody but me would ever catch this." But then, I rhought "Nobody but me would catch this, but I Have to get it right if I have accurate photos of it!" So, I started reordering and repainting some of the stripes, actually all of them. What was black has to be white, and vice versa.

I'll feel better with this change, even though I will probably never put it in a scale contest where someone could possibly catch my error. Like with consummate artists like you, Rex, Dan, and others, I know you guys would appreciate this change while others would think I'm a loon for doing it!

Cheers

davegee

[Elbee]

Like with consummate artists like you, Rex, Dan, and others, I know you guys would appreciate this change while others would think I'm a loon for doing it!

Cheers

davegee

Dave,

Hah!

I hear you.

On the rare occasion Tamms asks "What is that?" when referring to the models, I will begin to answer only to watch her eyes roll as I read her thought cloud, "This boy is crazy."

We are geniuses in our own minds, if nothing else.

Love your work.

Best, LB

[davegee]

Dave,

Hah!

I hear you.

On the rare occasion Tamms asks "What is that?" when referring to the models, I will begin to answer only to watch her eyes roll as I read her thought cloud, "This boy is crazy."

We are geniuses in our own minds, if nothing else.

Love your work.

Best, LB

Believe me, I get the SAME reaction at home with my wife!! It's good they keep their senses of humor or sanity being around the likes of us!! 🤣🤣🤣

[davegee]

We were out of town for a couple of days and when we got back Callie's packet of vinyl transfers were in my mailbox. Although tired, I Had to put on at least a couple of them on the bottoms of the wings. My aircraft is very time specific and at the time I have "frozen" for the airplane's appearance, the left bottom wing was not painted but sported a big 55 inch diameter circle with the star inside. The right wing still had the standard 40 inch circle and star inside. There are invasion stripes on the bottom of the right wing, but none on the new, unpainted bottom of the left wing

Callie's work was again, beautiful! Lots more to do and then a LOT More to do once I get my converted bubbletop fuselage back from modifecation center in California.

Tomorrow I hope to reinstall the main landing gear and doors and start working on details like hydraulic lbrake lines and the shrinker bars that on the real airplane mechanically shortened the gear during retraction by 9 inches so it could fit in the wheel wells. Upon gear extension, the gear would increase by that same nine inches for prop clearance. Imagine, this technology was available over 80 years ago!

Cheers

davegee

I just finished the redo of the invasion stripes on the bottom of the right wing. That was a few hours' work, but I'm glad I did it. It now conforms to period photos of the real airplane on that bottom right wing. I don't know why this is different than other planes invasion stripe painting, but it could be that this wing was replaced while they were still supposed to have the invasion stripes on the bottom of the wing and fuse, and it was painted differently the second time. I don't know, just a guess.

[davegee]

Today's assignment on the docket is making the simulated hydraulic lines for the brakes and the shrinker bars. They actually move like the real ones during gear operation but don't actually increase or shorten the strut length. Years ago, there was a company that made functional ones for large scale P-47s. I never built a jug in that larger scale, but if I did, I would have bought a pair of these beautifully designed landing gear struts.

A few hours later update: I got the detail parts of the brake lines and shrinker bars installed on my airplane. All totally scratchbuilt, going from photos of the real thing. Should improve the look from a stock model to something a little more realistic.

There are small things I can do this weekend like installing placards and nomenclature around the wings and tail, and once I get the fuselage in my hands it will be fulltime work on it until I'm ready to put the whole thing together for more testing. I'll attach a few pics of my work today. The angled metal tubes are the shrinker bars.

Like with my other P-47s, my E-Flite 1.5M P-51Ds, and my Corsair, they all have been fitted with the 3.5 inch diameter Robarts. In the photos there are spoked wheels that will be covered with hub caps on the P-47.

davegee

[vrosi1963]

The fuse is on its way back to Dave , finish work on the 3d plug next week

[jetfool]

Fabulous work, Davegee.
Best Regards, Rex

[vrosi1963]

what size lipo are you guys running in the P47 , I like the functional struts but need functional bomb releases also. I am considering the FMS F-86 possibly or this

[davegee]

what size lipo are you guys running in the P47 , I like the functional struts but need functional bomb releases also. I am considering the FMS F-86 possibly or this

I use the 5000 mAH batteries exclusively for this airplane since 2016. They work great, provide a good CG when installed correctly in the nose.

I just bought a bomb release from E Flite. I'm waiting for it to show up in the next week or so. I plan on installing it in the belly of this latest P-47, and if that works out well, I'll put it in at least one more of my P-47s. I would also like to look into a bomb drop from the wing pylons but need to check to see I can run the wires without making a big mess cutting into the wings. f

I see Flightline will be offering one for their new P-51D model, I'll look into that, too, for future possibilities.

Davegee

[davegee]

Parts starting to stack up in the workshop. James has already sent the modified bubbletop fuselage to me via UPS, should be here next Wednesday. In the meantime, I'm starting to print up cockpit parts so I can start in on the cockpit once I get the fuselage in-hand. Looking forward to that.

Cheers

davegee

[Grossman56]

Christmas is coming early at Dave's place, or late depending on how you look at it. Pilot is coming along. Still getting the hand of the new camera. this is before the white straps...



And after, beside my "Big Boy'...



You can see the head on the spike in the background. It's interesting what a difference it makes when you add the white straps. Up until now the colors a pretty dark as I paint from the deepest crevices outward. He looks pretty good so far even though it was a rough session. I roughed up the boots by applying a watered down mahogany brown and then wiping it off, shows some of the dirt and mud that would accumulate on them. Still a ways to go , but looking good.

Grossman56
(Dangerous Dan)

[davegee]

Christmas is coming early at Dave's place, or late depending on how you look at it. Pilot is coming along. Still getting the hand of the new camera. this is before the white straps...



And after, beside my "Big Boy'...



You can see the head on the spike in the background. It's interesting what a difference it makes when you add the white straps. Up until now the colors a pretty dark as I paint from the deepest crevices outward. He looks pretty good so far even though it was a rough session. I roughed up the boots by applying a watered down mahogany brown and then wiping it off, shows some of the dirt and mud that would accumulate on them. Still a ways to go , but looking good.

Grossman56
(Dangerous Dan)

Looking great, Dan! Schilling and a lot of other pilots were known to wear RAF boots (preferred) or something like it, for warmth (although the toasty cockpit of the P-47 didn't really need it) but mainly if they had to hit the silk, as they say, so that they would still have something on their feet for escape and evasion. Regular shoes would often fly off with the force of the parachute opening, and there you are trying to evade the Jerries in your stocking feet!

[jetfool]

Trying to upload a pic. and it says php size to much to download. What am I doing wrong, never happened before.

[Elbee]

Trying to upload a pic. and it says php size to much to download. What am I doing wrong, never happened before.

Rex,

If the you took the picture your camera or phone might be set to a high resolution that results in a large mb file.

You can open the picture file in MS Paint, change the physical size by either pixal count or percentage and hit save.

Using percentage is easiest, I will use 25% for example.

If you downloaded the picture, you can still do the same thing, but make certain the file is a JPEG or JPG.

If it is multiple pictures that are adding up, you'll want to do this to each file in the group.

PITA actually, but we live with worldly constraints.

Best, LB