...
287 results in 0.0153 seconds.
-
Found this online, from May of 87, but the instructions would be the same for previous years.
... -
Here's a screen shot that I shared a couple days ago. This mod is looking almost like the images of the restored M24 videos I've watched. Note the rounded...Leave a comment:
-
They use the same pin. Order it, and a spare.Leave a comment:
-
Here's an off topic question that I couldn't find an answer for, so I thought this would be a good thread to ask. I see many threads that have been liked....Leave a comment:
-
Here comes the plastic surgery again!!!
The rough sanding of the Dremel is done, and now the file goes in the finish...Leave a comment:
-
OK, here's the removal of the rear paperclip lifting eye's, and all the molded in details Tongde has on the rear of the M24. The rear of the lower hull...
Leave a comment:
-
https://www.facebook.com/groups/sgta...3012289986724/
I received my NF M4A3E8 and like SoCalBobS had a dead battery that...Leave a comment:
-
Next up is the smoke mortar with the piece of styrene glued in. To make this insert, I cut a thin strip a bit wider than I needed, and I clamped it in...
Leave a comment:
-
The jump rings were glued onto the mantlet, and they received a small amount of Bondo!!! Then I cut a piece of 1/16" sheet styrene to fit the elongated...
Leave a comment:
-
Good morning everyone!!! I'll get caught up, and then I'll get back to the M24's Mods.
Leave a comment:
-
I suspect that since it is listed in the 70mm F-22 spare parts pages, that it's likely they omitted the F-22 reference. It's used in several different...Leave a comment:
-
David, I'm sure you're driving your M8 around, how is the traction with the 3DP tires? If it is, maybe I could get away with using Andy's model kit wheels/tires...Leave a comment:
-
Raspberry PI
Hello all, I’m new to the channel. Has anybody updated their tank with a raspberry pi or raspberry pi pico? -
Ok. Done a ton of searching. Can't find the answer. On the MRC website it shows a main gear pin in spare parts, but in the description it does...Leave a comment:
-
I used firestreaks on mine, many thanks!
I've swapped the motor and ESC in mine, 3100kv/ 50 amp Admiral ESC.
I also managed...Leave a comment:
-
Tunisia.
...Leave a comment:
-
Adding some crews to my Crusader.
...Leave a comment:
-
Here is mine. No intention for IR battle at this point.
...Leave a comment:
-
Hmmm…,The full scale A-10 does not have afterburners!
Are you sure you want to go against the “scale” aspect of the plane? Gonna look odd!!!!...Leave a comment:
-
I was told he printed them also....Leave a comment:
-
That's a great question, Bob. Tank me answered well. I think most tools like that used hickory for the wood due to its strength and I'll bet it was unfinished....Leave a comment:
-
I'm sorry you missed that deal. I hope you're able to get one of these before they sell out....Leave a comment:
-
Hi Craig: today's flights after a year layoff from flying it was a pleasant surprise. Not perfect but reasonable tracking for takeoffs and rollouts on...Leave a comment:
-
Hey brothers, has anyone installed afterburner lights on this plane yet... and if so what afterburner light did you use 🤔...Leave a comment:
-
I think we can't do much without understanding how you're setting up the servo, if it's mounted correctly, what your recoil and such look like. And we...
Leave a comment:
-
Dave out of my 3 warbirds. I agree this one tracks the least straight on takeoff. Lotsa r rudder req.. I'm wondering if full as3x will help...Leave a comment:
-
No one posts here anymore?
3 vids of mine in a row... damn!
What are you guys doing with your ARESes?
...Leave a comment:
-
Now for the floor. The AHHQ kit piece is about a 1/4 inch too long. I choose to cut it down on the ramp end to keep the commanders seat assembly mounting...
Leave a comment:
-
Thank you for the advice but I have tried all the different settings and nothing works! I think you have to do something with the wiring but I'm not understanding...Leave a comment:
Leave a comment: