Originally posted by Dirty Dee
View Post
Announcement
Collapse
No announcement yet.
Official 3DP Thread
Collapse
X
-
Originally posted by WrightBrosRC View PostI just maidened this beauty. 3D printing has come a long way in a short time.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Originally posted by Elbee View Post
WB, she is thing-a-beauty. Nicely done. What are her specs and equipment stats? Best, LB
No wing spar by design... seems strong enough, but flexes a bit. 40 years of using wing spars made me nervous about it. We'll see how it does in the long term.
Rattle can paint and hand cut vinyl decals.There are hundreds of RC aviation videos viewable here; WBRC
- Likes 2
Comment
-
Hey y'all, I've doing a bit-o-3DP for my FlightLine 1600mm Corsair. Though not as exciting as an entire airframe, I think it is always a good thing to add features. I've always thought strut covers could be improved upon. Robart are okay, but mostly for the music wire struts. These are my attempt at some updating, Best, LB
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 2
Comment
-
Originally posted by Elbee View PostHey y'all, I've doing a bit-o-3DP for my FlightLine 1600mm Corsair. Though not as exciting as an entire airframe, I think it is always a good thing to add features. I've always thought strut covers could be improved upon. Robart are okay, but mostly for the music wire struts. These are my attempt at some updating, Best, LB
davegee
- Likes 2
Comment
-
rifleman_btx, very nice. What filament do you use for printing those? Best, LBI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Originally posted by Elbee View Postrifleman_btx, very nice. What filament do you use for printing those? Best, LB
Comment
-
Originally posted by rifleman_btx View PostWith this printer though I might revisit the f86 again for a reprint
I, too, printed their F-86 (fuselage only) and I am still amazed at the quality, the thin-wall designs, and overall construction.
How many of their planes did you print?
I might revisit that myself as I have the OEM 90mm EDF from my F-18C.
Not sure if the F-86 was 80 or 90mm. Best, LBI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
[ATTACH]n376290[/ATTACH]
Hey 3DP Printers/Aviators,
I designed a replica of the Freewing/Flightline Clevis for the 1.5mm Pushrod.
I was given 5 for my Flightline 1600mm Corsair Bubble-Top instead of 6, see picture.
These are available from MotionRC in a package of 6 pcs for a reasonable $2.39USD.
Shipping these little fellows to me in the "Heart of America" is an additional $4.21USD via DHL and will take approximately 10 days.
So, what to do?
Best, LB
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Elbee View Post[ATTACH]n376290[/ATTACH]
Hey 3DP Printers/Aviators,
I designed a replica of the Freewing/Flightline Clevis for the 1.5mm Pushrod.
I was given 5 for my Flightline 1600mm Corsair Bubble-Top instead of 6, see picture.
These are available from MotionRC in a package of 6 pcs for a reasonable $2.39USD.
Shipping these little fellows to me in the "Heart of America" is an additional $4.21USD via DHL and will take approximately 10 days.
So, what to do?
Best, LB
Comment
-
Originally posted by kallend View PostPost the STL file on Thingiverse.
Kallend, not really a guy that posts over there. I understand they are working on the website. Anyway, here's the STL if you want it. Let me know if it downloads poorly. I put it in a ZIpfile. Best, LBI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
I'm looking for a decent replacement for the ejection seat for the f9f cougar. It doesn't need to be perfect just good enough so the scale monkey on my back doesn't itch.
I've been messing around but haven't found the right look yet. So I thought Idd cast about to see if anyone has a seat design similar to the seats Grumman made for the cougar
- Likes 1
Comment
Comment