Official FlightLine F4U-1A Corsair 1600mm (63") Wingspan

[Elbee]

Corsair Crew,

Here is a picture of the 'modified' Corsair Spinner.

It is a bit smaller and looks less "Bozo Nose" IMHO.

It uses all the OEM hardware.

I wiped it down with Acetone, primed and sanded it, then finish color.

It fits like a dream.

I will email the G-Code for a Prusa Mini to Grossman56 / davegee if y'all want it.

Best, LB

[Grossman56]

Looks good Elbee!
I've just been looking for the STL files that you made to augment the Spitfire cockpit. Are they available?

Grossman56
(Dangerous Dan)

[jetfool]

Beatlerat,

Here is the FL Corsair decal sheet that came with my model. Hope this helps

Best Regards, Rex

[Grossman56]

Those sheets alone are works of art, don't throw them away!

Grossman56
(Dangerous Dan)

[Grossman56]

Oxygen tank installed and here's what the cockpit looks like today:



A few more things to do, like make a insert to fit over the dash so there won't be any gatoring in the future and I'd like to come up with something better for the bullet proof glass. Also I want to run wiring from the switches into the dash like Dave did. It's never ending!

Grossman56
(DangerousDan)

[Elbee]

Grossman56

Outstanding.

Best, LB

[beatlerat]

Beatlerat,

Here is the FL Corsair decal sheet that came with my model. Hope this helps

Best Regards, Rex

Awesome! Thanks!

[Woohoo\o/]

Did the maiden flight this morning and it was a lovely flight. What sucks is the port side landing gear collapsed on the third landing.

first landing was a greaser.

second a minor bounce and acceptable.

third was less than minor bounce and the gear collapsed.

I knew about the fragile landing gear when purchasing this model but I didn’t know it would be THIS bad.

is motion/flightline doing anything about this?

[jetfool]

Motion has introduced a stronger pin in the retract but I don't know if anything else was changed. Check with Motion R/C

[Woohoo\o/]

Motion has introduced a stronger pin in the retract but I don't know if anything else was changed. Check with Motion R/C

Is this new pin included or must be purchased separately? Thanks for the info.

update: I should have been more specific. The plastic housing where the retract unit screws into came loose. I cleaned it up and reinstalled it with proper amount of glue. Hopefully it will hold up. That’s great news that it has a 6.5mm pin. Thanks.

[Elbee]

Is this new pin included or must be purchased separately? Thanks for the info.

WH,

It is my understanding that the pin is available for $21.49 USD.

Despite that price, each pin comes with a free retract mechanism, though you must specify whether you want the LH pin or RH pin.



Best,
LB

[Grossman56]

Now, just looking for something else to create, went on Tinker Cad and just had fun yesterday, trying all the different controls and figuring out the new sketch tool, pretty cool. The alignment tool was something that I couldn't figure out until I watched a couple of videos, really simple when you watch someone else use it.

One thing on my 'to do' list is create the maintenance platforms that some smart mechanic in the Pacific came up with. Coolest thing ever and answers the question of why there was a hole in the side of the cowling.
Now if I could just come up with some mechanic figures... I hate to say this, but does anyone know what the scale of the G.I. Joe 'action figures' was??
No one has yet come up with a 3D figure of a maintenance guy yet.





Grossman56
(Dangerous Dan)

[Elbee]

Now, just looking for something else to create, went on Tinker Cad I hate to say this, but does anyone know what the scale of the G.I. Joe 'action figures' was??
No one has yet come up with a 3D figure of a maintenance guy yet.



Grossman56
(Dangerous Dan)

Danger,

If your GI Joe is 12" he's considered 1/6th scale,i.e., 72" dude = 6'/1' = 1/6th scale'

72' man / 10" figure is 1/7.2 scale

72" dude / 8" figure is 1/9th scale and so on.

So, whatever height your figure might be divide that number in inches into 72" for 6' dude and you'll be close enough.

Make sense?

The FlightLine Corsair is what...1:8th scale. so if you want a 6' (72") pilot you'd simply divide 72/8=9 and your fully standing pilot would need to be 9" overall.

The FlightLine B-25 is listed as 1:13th scale but is closer to 1:12.8 averaging the scaled wingspan and fuselage length into a single number.

I scaled my design parts to that and it is working out nicely.

Best, LB

PS:BTW: Max Greuter includes a Scaling Chart for his 1/6th pilot figures. See attachment.

[Grossman56]

The man in his cockpit. One more piece coming, the frame around the bullet proof glass, then he gets sealed in.


Thanks for the inspiration Rex, Steve and Dave!!
He looks just like ME!!

Grossman56
(Dangerous Dan)

[jetfool]

Looks very nice Dangerous. Your going to have a beautiful aircraft.

Best Regards, Rex

[Elbee]

Grossman56

Yeah, there some similarities especially around the biceps.

"We want to pump you up."



Best, LB

[Grossman56]

[Aros]

Nice, nice work there Dan. Great job!

[Grossman56]

Thanks Todd.
So what's the news?? Any more single engine 1600mm WWII warbirds in the que?!?! At least give us some hope.

Grossman56
(Dangerous Dan)

[f4u ausie]

James has said this will be the year... Single engine WW2 let's Hope.. one thing 4 sure. Won't b a zeek.for my corsair to beat up on since I don't have a p47. That would do me