Originally posted by Larry D
View Post
Announcement
Collapse
No announcement yet.
Official FlightLine RC 1600mm P-38 Lightning Thread
Collapse
X
-
Okay I have shamefully been away from this thread for far too long. After all, the P-38 is one of my all-time favorite warbirds. I had this model five years back (has it really been five years?!?!?!? Sigh, my waistline would agree) when it first came out but sold it to fund other projects. But my hangar without a P-38 is no hangar at all.
So forgive the request for an updated "Tips/Tricks/Must Do's" synopsis to save me the hundreds of pages in the thread...Any takers? Would really appreciate it to get caught up on the latest tidbits about this lovely girl. Summer is fast approaching and I need my Fork-Tailed Devil fix!My YouTube RC videos:
https://www.youtube.com/@toddbreda
Comment
-
The 38 is still on my top 3 planes list to load up and take to the field. Infact, if I'm at the field flying and had not flown the 38 yet. I will get inquires about if I brought it, or is something wrong...anyway...my list of "Must do's" is 3 things long. 1. Upgraded struts. 2. Upgrade power system 3. Fly with two batteries in parallel (Lost a plane during take off when 1 battery quit on me)Lon
EFlite F-16 80mm, EFite DRACO, EFlite Night Radian, E-Flite P51 1.5m
Freewing A-10 80mm, F-86 80mm, F-15 90mm, Avanti. FMS DHC-2 Beaver, Fliteline P-38L ,HSD HME-262, HSD F86.
- Likes 1
Comment
-
Copy that, thanks...What upgrade power system and why?My YouTube RC videos:
https://www.youtube.com/@toddbreda
Comment
-
I have switched to the FlightLine P-38L Sport Power Set. Why you ask?...Well, the overall power performance. It's like going from a nice running Prius on some back country roads drive on a Sunday. To a mid-engine powered Chevy Corvette on a Saturday afternoon....It's hard to go back to the Prius power package. But I see those Prius's out everyday. Just a personal taste.....
1 PhotoLon
EFlite F-16 80mm, EFite DRACO, EFlite Night Radian, E-Flite P51 1.5m
Freewing A-10 80mm, F-86 80mm, F-15 90mm, Avanti. FMS DHC-2 Beaver, Fliteline P-38L ,HSD HME-262, HSD F86.
- Likes 1
Comment
-
Ah I see...Totally get it...But I just can't do the P-38 without 3-blades...My YouTube RC videos:
https://www.youtube.com/@toddbreda
- Likes 1
Comment
-
Slight twist to an old topic: I would like to run two batteries in parallel to both motors so that I won’t have to worry about one battery going bad and causing an asymmetric thrust problem. The attached image shows how I plan to make an adapter to accomplish this. Basically, I’m planning to use a “single battery adapter” as described in other posts in this forum (i.e., an adapter that allows the use of a single six-cell battery) in combination with a parallel battery adapter. Does anyone see a problem or have any experience with this type of setup?
Comment
-
To me you have too many connectors and each one is a failure point or a source of resistance and heat. Plus the EC5 would have to flow all the power for both motors. I would do what I’ve drawn. The bridge wires could be thin, 13 or 14 gauge since they are not directly supplying current, more for emergencies...
- Likes 1
Comment
-
Thanks for that, Evan! I'll do some soldering practice with some segments of scrap wire before do the real deal. Would you suggest using flux paste on the joint before soldering? I always have a problem getting the molten solder to soak through the wire strands. I'm using a 45W soldering station with adjustable temperature, and a broad, flat tip. I probably should go to a soldering forum somewhere and ask, but since I've got your attention, I thought I would ask...
Comment
-
While I do have paste I seldom use it. When people say they can't get good solder flow it's usually not good solder, like many things we are getting things from the east that are not the quality we're used to. Sometimes its we aren't using a good enough iron or we aren't getting good heat conduction but usually from what I see it's the solder... I use thin solder from Radio Shack, a specific P/N, been using it for years. Odd, the same stuff is a thicker size doesn't work as well for me.
Comment
-
Originally posted by AllThumbs View PostThanks for that, Evan! I'll do some soldering practice with some segments of scrap wire before do the real deal. Would you suggest using flux paste on the joint before soldering? I always have a problem getting the molten solder to soak through the wire strands. I'm using a 45W soldering station with adjustable temperature, and a broad, flat tip. I probably should go to a soldering forum somewhere and ask, but since I've got your attention, I thought I would ask...
- Likes 2
Comment
-
Originally posted by Aros View PostAh I see...Totally get it...But I just can't do the P-38 without 3-blades...3 Photos
- Likes 2
Comment
-
Good food indeed! Thanks for the info!My YouTube RC videos:
https://www.youtube.com/@toddbreda
Comment
-
Originally posted by AllThumbs View PostSlight twist to an old topic: I would like to run two batteries in parallel to both motors so that I won’t have to worry about one battery going bad and causing an asymmetric thrust problem. The attached image shows how I plan to make an adapter to accomplish this. Basically, I’m planning to use a “single battery adapter” as described in other posts in this forum (i.e., an adapter that allows the use of a single six-cell battery) in combination with a parallel battery adapter. Does anyone see a problem or have any experience with this type of setup?
Im using the same set up but with a XT90 for the transition plug. Used Daves Electronics for years to have the connectors done.
Comment
-
Heads up....SOMETHING TO CHECK!
Not on the battery connection topic, but today I discovered that the trailing plastic wing attachment point of one of my P-38's outer wing panels had broken. It snapped at its base...opposite the end from where the threaded fitting is located.
The leading edge plastic attachment point was still intact...thank goodness. Grab the tip of the wing and wiggle it back and forth. The gap at the inner root of the outer wing panel should not show any play. If it does, either your outer wing panel screws are coming loose, or the plastic attachment point has broken. That's how to check for the problem.
She's an old bird with lots of flights on her, but a new bird operating off grass or rough pavement might develop this problem sooner. A word to the wise...periodically check your outer panel for any fore-and-aft play or looseness.
To make these fittings a bit more resistant to breaking, you might consider turning the bird upside down, remove the outer panel, and then fill the trough of the fitting near the base with a strong epoxy and smear some epoxy on the root rib area of the trough. Even better, you could put a tiny bit of fiberglass in this trough and run it 90 degrees from out of the trough to the plastic root rib. Anything to help forestall the breakage of the fittings at their base.
The picture below shows the one that snapped at its base.
-GG
- Likes 1
Comment
-
Originally posted by Aros View PostOkay I have shamefully been away from this thread for far too long. After all, the P-38 is one of my all-time favorite warbirds. I had this model five years back (has it really been five years?!?!?!? Sigh, my waistline would agree) when it first came out but sold it to fund other projects. But my hangar without a P-38 is no hangar at all.
So forgive the request for an updated "Tips/Tricks/Must Do's" synopsis to save me the hundreds of pages in the thread...Any takers? Would really appreciate it to get caught up on the latest tidbits about this lovely girl. Summer is fast approaching and I need my Fork-Tailed Devil fix!
#1 important tip...make sure your elevator actuator arm is securely glued to the elevator. I had one come loose on me, but was able to use the transmitter's flap vernier knob for pitch control and got it down ok. She responded to this pitch control method quite well. A switch-type flap system wouldn't work as well for this.
I also lost an elevator servo...discovered it prior to take-off. I replaced it with the same FW servo, but after having such good luck with the MKS HV69 servo (MRC is currently out of stock) on the MiG-29 and F-4, I am considering changing to this servo for the P-38 elevator, too. Higher torque, same physical size, lower operating voltage spec, metal gear and ball bearing. What's not to like, but more expensive than the stock FW servo...sigh.
https://www.motionrc.com/products/mk...-digital-servo
#2 Inspect the prop hub for cracks periodically. Especially, if you hear any change in the way she sounds flying by. I get 3 to 6 months on a hub before cracks begin appearing. I once slung a blade on take-off roll...instant roll over and inverted impact...minor damage. Look at the base of the prop...very carefully in bright light. The hairline cracks are hard to see.
A final tip...she sometimes continues in a spin for a few turns (my CG set-up no doubt) at idle power after the controls are neutralized. Tip...Leave in some power during spins, and she recovers from the spin immediately...as soon as you neutralize the controls. This means making spin entry somewhat of a snap roll into a spin maneuver, but it does work well when you wanna spin...and you know she'll stop spinning quickly.
-GG
P.S. I also wired my batteries in parallel with connectors after one prop stopped producing power...instant death for that bird (Photo below) Can you tell which prop stopped producing power? LOL
- Likes 1
Comment
Comment