Announcement
Collapse
No announcement yet.
Official Freewing 80mm MiG-21 Fishbed Thread
Collapse
X
-
Check me out on youtube at https://www.youtube.com/user/gooniac33
I am an RC addict and innovator that loves to share my knowledge with those that need help. Ask me anything via PM if you need help! Check out my Website here https://www.gooniac33.me/
Comment
-
I thought I would do my review thanks for reading and hope this helps all!!
Mig 21 review and build
Received the plane in great shape from UPS that is a great start for sure.
As usual packaged in a clam shell foam core . That is actually nice for them to do so well protected.
this plane is gorgeous in that plastic glaring back almost do not want to fly it ... NOT!
The build
So the first thing they want you to do is remove the intake cheater cover off. Then glue the tail end of the fuse to the main body . So they supply a wire with a hook on it this is used to pull the elevator to the battery bay. This is also used for the wing connector wires as well.
Install the carbon spars threw the fuse then install The wings. They get screwed on at this point pull all wires threw the fuse. Their is two clear plastic pieces (this made me wounder what it was for ) well they fit on the sides of the inner fuse and covers over the wing wires. You glue that in place 1 for each side. This is used to stop any air flow loss. Now use the long wire and pull all wing wires to the battery compartment. I used the bread ties to make the wires neater in the plane yes zip ties work to (hay these were free!) Now re glue the cheater cover back on I used the supplied glue.
Now screw on the elevators and hook the pushrods up and that is were I got my first glitch. On mine the pushrods were actually to long on both sides. As you realise to long is not an issue but to short and that's a problem. I just straightened out the z-bend and used my z-bender and fixed it simple as honey.
Next was install the rudder then pull wire to the nose with the rod again. use 4 screws to fasten this down.
Now glue the pylons to the wings and wing fence, antenna ,plastic part F-G and fin. On the carbon rod , antenna ,nose cone I choose to not glue them on for storage and transporting they will break I now it.
Radio setup
Elevator, ailerons and rudder are all identical
Low 50 expo 30-50
Med 72 expo 30-50
High 100 expo 30-50
Flaps
Put the flap servo speed to 4-5 second delay
Take off flaps 30% up elevator 10% up
Landing 45-50% up elevator 15% up
The idea is to not have to use any up elevator on landings. You want to come in high alpha at a 45 degree attitude. You only need to use throttle and ailerons possible rudder but not elevator until you flair. If you start falling use throttle if you rise decrease throttle that simple.
Flight
I will add this once the weather corporates with me to do so so stay tuned!
PROS
this plane went to gether fairly nicely with some glitches
the over all look is fantastic
I like not having the gear doors on this just another thing that can go wrong so that's cool for me.
CONNS
This is the first time I have some real issues they are minor just need to be brought up.
I know the wings are small but once you put the wings on and glue the plastic pieces in the fuse the wing can never be taken off. (remedy I will bye some servo wire connectors m/f and cut the wires at the wing attachment points and that will fix it) .( ADMSERVCONNSET)
On mine I had to do some rebending on both elevator pushrods (not a big issue just saying)
Overview
Other then the small issues this plane is fantastic and once the weather breaks this baby is going mach2!!! OK what ever it will do is fine .
I think this is a sure beauty and will keep you up to date
Comment
-
Originally posted by RCjetdude View PostYou are warm Pat... I hope to debut a functional version at NEFI.
Thanks Ryan.Warbird Charlie
HSD Skyraider FlightLine OV-10 FMS 1400: P-40B, P-51, F4U, F6F, T-28, P-40E, Pitts, 1700 F4U & F7F, FOX glider Freewing A-6, T-33, P-51 Dynam ME-262, Waco TF Giant P-47; ESM F7F-3 LX PBJ-1 EFL CZ T-28, C-150, 1500 P-51 & FW-190
Comment
-
what programmer can I use to change the setting on the esc, I have two flights on mine and it seems under powered, will the inrunner that freewing sell make it any quicker?. I fly from grass and it takes forever to get to flying speed and when in the air it does not seem to get going and the new nano tech 5000 only get two mins and have 26% left is this correct? I have had a 90mm stinger from the same grass and it went like a rocket so I was expecting the same sort of performance.
Comment
Comment