Alternative motor windings and drive schemes

[Clugh]

suitable propeller wanted | RC-Network.de

Watch this inrunner thread closely boys. Lets see if the motor Fuhrer in Dresden touches Hanz's inrunner and the real 93% efficiencies it gives with his 71% eta wundermotors and 8 pilots.

U already see the remote silence about the P1000.

General case
Going from efficiency ηold to efficiency ηnew
would give an increase in maximum power motor can handle by factor N

N = (1 - ηold) / (1 - ηnew)\

calculate the N

ηold = .71

ηnew = .93.3
Then the truth hurts Powercroco and his 8 fun flying pilots flying 71%...

They wont win a thing if the right pilot and motor shows up at his backyard events with 20 pilots. At least half the contestants if not all fly him. The one that doesn't fly him holds the current world record. He flies a Pyro 1000 wound by someone else ...

[Clugh]

What's up buddy? You gonna post something remote about it in croco world or stay stuck on stupid?


POWERCROCO

I HAVE YOUR FULL ATTENTION CONFIRMED! η=.71 KEEP TYPING ON THE GSM RALPH

Thanks,
Hubert

[Clugh]

The "N" or power handling factor with the Lehner inrunner is 4.13. Umm thats over 4 times more power handling than your motor.

Its 345 grams



Hubert

[Clugh]

Yes sir.... they set you up on the GSM with the thread because they knew id calculate everything and report it. It suggest a geared inrunner is 4 times better power delivery from their battery.

Its to bad the old man in Bayern doesn't actually drive or fly anything RC. This suggest that all he needs is Hanz's motor to rule your backyard events and 8 pilots.

Der Mehrpreis im Laserhaus ist ihnen egal. Sie zahlen bereits für überteuerten Mist.



Der Lehner kostet 325 Euro

[Clugh]

Neu 1530 3/4 turns

Woo....

[Clugh]

The leader signed out!


Hubert

[Clugh]

BTW when you slither back in you can explain to yoiur friends in Germany how Helmuts theory on the torque speed line and efficiency applies to this PMDC
A permanent magnet flux switch machine. He is no longer here so you have his torch in your hands correct? Carry on.....

[Clugh]

[Clugh]

Do you see the maximum torque is delivered at the start and through most of the speed range...

[Clugh]

Die 8 Piloten sollten Burger King wegen seiner Whoppers verklagen.



Danke
Hubert

[Clugh]

Marcus builds a great plane but they need to power it with something else besides a powercroco with 5 dollar NMB's and UHU construction epoxy as a securing material for the windings. That is all sub par for the highest levels of competitive flying. The motor is heavy and the efficiency leaves alot to be desired.. They have shown they are at the limits with it.

They can also lose the old YGE with turnigy brians....holding on to that dinosaur makes zero sense in 2025




1 million thumbs up from your 8 friends wont change that.

[Clugh]

[Clugh]

...

[Clugh]

The P1000 winder in Germany calls Powercroco out on his data supression so you may read here that I am not the only winder that is seeing what he is doing. His own people see it too. Ralph had no response and acts like he didn't see the posters words.


Thats certainly a "chic" response from your own people to your post I just called out earlier Ralph.

LMAO
Hubert

[Clugh]

Warum nennt er dich einen Halbgott, Ralph? Was ist los in Crocoworld Playa? Es klingt, als würde er Hugh nachplappern ...

Und welche Haare, Thomas?

Schöner Beitrag. Ein Junge


Danke,
Hubert

[Clugh]

At one time he banned the winder from showing up at his "EVENTS" to support his world record pilot Christian Hidde buts thats just another chapter of Ralph Okon.

They are scared to talk about the truth because they might not get invited to the next one.

Ralphs events are rigged anyway and alot of people on the INTERNATIONAL scenes know it. Ive received emails from competitors that do not want to be quoted publicly.

I've had the math on Ralph for quite awhile 8 pilots!.

I'll never kiss his ring of fallacy!

RC groups and Helifreak did not want to hear this but it is the truth you can only BAN it for so long to accommodate him just because you are a mod and purchased his motor.

That's what you did.

[Clugh]

Now you are back...you know I saw his post. and you want my feed back? Enjoy it. I suggested you mind your business and let me mind mine but this is not something you wanted to do. Ok then....


Keep typing....

Hubert

[Clugh]

Wie lange wird es dauern, bis Gerd oder Tim dich in Crocoworld vor der Wahrheit über den anderen Poster Ralph schützen?

Sie haben ihn in der Vergangenheit gesperrt, um dich zu schützen, denn sie sind deine Kunden.

Solange ich hier bin, werden Sie hier in Amerika keinen einzigen Stellvertreterkrieg gewinnen.

YT
Hubert

[Clugh]

You dont have experience with anything or you wouldnt fly that black and gold nonsense you wind. U wind a conventional wye. Thats all you do with 5 dollar bearings and the wrong epoxy. All the way wrong. Sit down and be quiet. You are at 71% Mr experience.

but so many other can do it better..


You are a liar Ralph Okon as youve already posted the motor were equal which is very false. You always trying to save yourself from the overpriced junk you sell your friends.

You are a real joke...

Im not impresed with your post. Modisc with a 4130 cobra and an HK stator YOU are the one that said the gaps were too small.

YOU Ralp Okon.. no one eleses so now you stroking yourself for breaking your own bs advice

Thats stellar Ralph but another winder has already done it so you are a copy cat as ussual. A thief of idea. You are no guru at all .

It doent matter the scorpion has poor bearing support so II am going to laugh when it strikes anyway but since the motor has no reported data it can be trash and no one will know...

who cares about a data less paperweight?

8 pilots? A small crocoworld indeed.

Lo and behold another one of Okons lies about electric motors.

[Clugh]

I have never seen a cracked ceramic ball EVER!. You can smash one with a hammer and nothing happens!!! SiC for instance is hard as a diamond and can stop the axial movement of industrial robots that are as sturdy as your most rhobust milling systems . You all dont know anything about the materials Im sorry. We manufacture it. SiC GaN Saphire and moissanite. They do not know anything about these material apparently. I see them literally almost everyday.

Alot of hobbyist do not really know what they are talking about.

If you damaged a SiC or Ceramic ball a steel one would definitely be ruined in the same scenario.