My base gray high performance version had the damaged elevator servo wires. I replaced the servos from my own stash and trimmed the pockets with an xacto blade about half a mil on each side. I reported this to Motion a couple days ago. Today I read the technical service bulletin. Doh!
One thing I noticed in the manual is that the stated length for the rudder control rods is too short by about 5 or so mm.
I am running full span flaps, flaperons, tailerons, and rudder brakes.
One thing I noticed in the manual is that the stated length for the rudder control rods is too short by about 5 or so mm.
I am running full span flaps, flaperons, tailerons, and rudder brakes.
Comment