What did you fly today?

[F106DeltaDart]

Few the 600 UH-1N, Hangar 9 Corsair, and FMS P-40 this morning in an attempt to beat the heat wave. Had a very strong crosswind and one of the most gut clenching landings I’ve had on the Corsair. It was coming in at nearly a 45 deg crab angle on approach and I somehow got a smooth landing out of it. Decided not to try that one again! Also got in 2 flights on both the P-40 and 600 UH-1N as well.

[Hugh Wiedman]

Got 15 flights in today, 5 each on the Avanti, Stinger 90 and F-4. Took the SU-30 out but the grass was too long and it never got off. Our clubs lawn equipment all broke down, however, they are looking at getting a new one that they tried out yesterday. Only problem is it only cuts the grass 1" long, where before the equipment cut it down to 5/8". That extra grass made it look like it was in soup. If they buy this machine, I'm outta luck cause my SU-30 and my F-16 will never get off. Even the other jets clearly noticed the difference as they had a rough time getting off. Of the 500 members, I'm one of the few who fly electric, most are gas and turbine, so things aren't looking good. One more thing to go to heck this year. I'm seriously bummed. I wanted to try the Hobbystar 8000 on the SU-30, but no point.

Additionally, I had something weird happen to my DX9. Got it new at the beginning of the year and it has worked great (over 150 flights) up till today. All of a sudden, the roller quit working. The button part of it worked, went to the menu, but the roller was "dead". Turned it on/off several times and still nothing. Then I started pushing every button I could find and toggling all the switches, shut it off, turned it on and it started working again. Anyone heard of such a thing that would make the roller not work? Left a technical support message with HH, but this is just weird. It works fine now.

[xviper]

Additionally, I had something weird happen to my DX9. Got it new at the beginning of the year and it has worked great (over 150 flights) up till today. All of a sudden, the roller quit working. The button part of it worked, went to the menu, but the roller was "dead". Turned it on/off several times and still nothing. Then I started pushing every button I could find and toggling all the switches, shut it off, turned it on and it started working again. Anyone heard of such a thing that would make the roller not work?

I've had a DX8 G2 for several years now and only last week, the roller button glitched. The roller works but the button part will only beep in certain menus. It works, just no beep sometimes and no noticeable detent.
Wouldn't ya know it, I had a used back up DX8 G2 that I sold only 2 weeks ago. Oh well, when this one quits, I'll just buy a new one.

[Hugh Wiedman]

xviper don't you just hate intermittent electrical glitches? I upgraded to the DX9 from my old DX6 so I could get additional channels to set up flaperons in the SU-30 and it's worked great until this last glitch. The old DX6 was starting to give me problems with the 3 position Switch B that I used for my dual rates (sometimes it wouldn't change and had to flip it hard), but otherwise it worked great for 5 or 6 years. I've messed around with the DX9 since this happened this morning but can't get it to go bad again. Just wish I new what caused it to begin with.

[BluesDragon]

Got in a few sunrise flights this morning. picked up the Piper Cherokee (Outacite) last week and got 'er maiden flight done today. Spot on fantastic scale flyer! The navigation lights are perfect for sunrise flying. The nav lights on the lil' Timber do well too. All in all.. a good morning..

[DCORSAIR]

What did I fly this morning, nothing!! .About a month ago I some how manage to tweak my back/neck area, ended up with a bulging disc on the right side which is pushing on the nerves to my right arm, so its hard to hold the transmitter and move the sticks, left side it good though, might have to get one of those single stick radios, lol. So with the Covid thing going on, its making it difficult to get in and get it fixed, sure miss flying thats for sure, keep the posts coming and pics, keeps me motivated and not to sell the rest of my rc stuff, 36 yrs of flying and never had anything like this happen, I knew I shouldn't have ordered that new Roban OH-6 Cayouse, oh well, I am addicted to this hobby and that's all there is to it...

Here is a video of the exact Roban OH-6 Cayouse that I have coming, all the way from Germany, its already on its way, it just left Germany a few days ago so I figured a month or so.

https://youtu.be/IvJ9hjnwOgU

[F22trainer]

Got in a few sunrise flights this morning. picked up the Piper Cherokee (Outacite) last week and got 'er maiden flight done today. Spot on fantastic scale flyer! The navigation lights are perfect for sunrise flying. The nav lights on the lil' Timber do well too. All in all.. a good morning..

Glad you like the Piper, it’s a solid flying airplane.

[Aros]

Maidened my Bird of Time EP. Flew great, did not want to come down, lol.

[Mad Baron]

Flew several planes yesterday, Tigercat, Cessna 150, Corsair, & the Bearcat. Tried to fly my B-26 but after repainting it some paint dried in the pushrods so I have to free them up. Have to fix the Bearcat since I landed short of the runway in some taller grass. Ordered new wings and decals to fix this bird.
The new extended retracts

[Hoomi]

One flight each on all of these today, under overcast skies. Temps at the field this morning ranged from the high 80s to the mid 90s, and a breeze from the south varying between about 4 mph and 8 mph. A few drops of rain, but not enough to cause any problems, though I could see some heavier rainfall off in the distance. It's been nice, the last two trips to the field, to get the Stinger back into the air.

[ridgerunner]

Drove up to my nearest AMA field in Gunnison (Utah) this morning and had the place to myself.
Light winds, sunshine, my Pandora and Blade 230S-V2 == another day in paradise!

[BluesDragon]

...under overcast skies. Temps at the field this morning ranged from the high 80s to the mid 90s, and a breeze varying between about 4 mph and 8 mph.

Pretty much describes flying conditions at the field here in Phoenix this morning. I mainly had the Commander up today. It needed some touch up service on the surface controls. So it got the most flight time today. I did have time to get one flight on the Cherokee before I had to run though.

[xviper]

From the really big to the medium to the little runt. Tried to get some videos but the dumb camera failed me.

[Wild Man]

XVIPER. Have you flown your Eflite 80 mm F-4 with the tanks and armament on it ? When I flew mine with the tanks and missiles I found that the Center drop tank, decreases the air flow to the fan. So on all flights since I do not fly it with the Center tank mounted under it

[Hoomi]

Drove up to my nearest AMA field in Gunnison (Utah) this morning and had the place to myself.
Light winds, sunshine, my Pandora and Blade 230S-V2 == another day in paradise!

My mother-in-law and brother-in-law live in Manti. We usually get up there once a year for a visit, but with the virus situation, it's not looking like we'll get up there this year. Nice to know, though, that there's an AMA field nearby, should I decide to pack a plane or two.

[RCjetdude]

I would like to recognize my son Enoch who completed two years of flying a plane every day. Inspired by George Baker of Tired Iron Aviation he did a large part of it with the little XK Edge A-430. It has made him a heck of a pilot. To commemorate the occasion he is getting a 64mm F-18 at his request. Way to go Enoch!

[TiredIronGRB]

I would like to recognize my son Enoch who completed two years of flying a plane every day. Inspired by George Baker of Tired Iron Aviation he did a large part of it with the little XK Edge A-430. It has made him a heck of a pilot. To commemorate the occasion he is getting a 64mm F-18 at his request. Way to go Enoch!

Great job Enoch! He's one of our best pilots (much better than me)

[F22trainer]

I would like to recognize my son Enoch who completed two years of flying a plane every day. Inspired by George Baker of Tired Iron Aviation he did a large part of it with the little XK Edge A-430. It has made him a heck of a pilot. To commemorate the occasion he is getting a 64mm F-18 at his request. Way to go Enoch!

Great going Enoch!

[Beeg]

I would like to recognize my son Enoch who completed two years of flying a plane every day. Inspired by George Baker of Tired Iron Aviation he did a large part of it with the little XK Edge A-430. It has made him a heck of a pilot. To commemorate the occasion he is getting a 64mm F-18 at his request. Way to go Enoch!

Congratulations Enoch! Quite an accomplishment!

[Elbee]

I would like to recognize my son Enoch who completed two years of flying a plane every day. Inspired by George Baker of Tired Iron Aviation he did a large part of it with the little XK Edge A-430. It has made him a heck of a pilot. To commemorate the occasion he is getting a 64mm F-18 at his request. Way to go Enoch!

Enoch, Heartiest Congratulations, you've 'earned' it. Bravo Zulu, Sir. Best, LB