OK, I'm not the sharpest tack in the pack, but I can't seem to find the 3DPUP cockpit set mentioned in the overview or in some of the squawks. Is this a pre-printed set or just a file for printing youself. Callie even has an instrument panel graphic but I can't find the printed set in spare parts or upgrades.
I plan to install an Aspire card and 2 TT-25's, each with additionnal heaat sinks on the transducers, but wondering if there is enough room; can't tell by the photos. One of you chaps must have installed that already. A photo of your location would be helpful. I've installed about 10 of these in various planes, and each one has it's own challenges. Installed them in each of my B-24's and so far that was the tightest fit, speakers just aft of the bundle wing wires and card upside down behind the wing tube - had to use my wife's little fingers and hands to get all in position.
I plan to install an Aspire card and 2 TT-25's, each with additionnal heaat sinks on the transducers, but wondering if there is enough room; can't tell by the photos. One of you chaps must have installed that already. A photo of your location would be helpful. I've installed about 10 of these in various planes, and each one has it's own challenges. Installed them in each of my B-24's and so far that was the tightest fit, speakers just aft of the bundle wing wires and card upside down behind the wing tube - had to use my wife's little fingers and hands to get all in position.
Comment