I made it clear to Andrew in customer service that I was not looking to have the plane replaced. I just want some compensation. Maybe 200 or $100 in store credit or maybe just give me a new battery or something like that. I never asked for the plane to be replaced I never asked for anything to be warranted. I just think since I’ve spent thousands of dollars on airplanes in the last couple years with motion RC that they could do a little something for me. I’m in the business of selling a product that is manufactured and sometimes the manufacture does not want to step up and I have to do something for the customer to keep them happy. Sometimes it doesn’t take much just a little good faith.I would love to have somebody that could get a camera up there and help look for it but the problem is we have nobody in our club that has that capability. Also if we fly over this forest we are actually flying outside of our field which is a whole Nother issue. Thanks everybody for your comments and suggestions.
Announcement
Collapse
No announcement yet.
Official Freewing F/A-18C Hornet 90mm EDF Thread
Collapse
X
-
Originally posted by Stevonoles View PostI made it clear to Andrew in customer service that I was not looking to have the plane replaced. I just want some compensation. Maybe 200 or $100 in store credit or maybe just give me a new battery or something like that. I never asked for the plane to be replaced I never asked for anything to be warranted. I just think since I’ve spent thousands of dollars on airplanes in the last couple years with motion RC that they could do a little something for me. I’m in the business of selling a product that is manufactured and sometimes the manufacture does not want to step up and I have to do something for the customer to keep them happy. Sometimes it doesn’t take much just a little good faith.I would love to have somebody that could get a camera up there and help look for it but the problem is we have nobody in our club that has that capability. Also if we fly over this forest we are actually flying outside of our field which is a whole Nother issue. Thanks everybody for your comments and suggestions.
Comment
-
Originally posted by Dustman View PostLB in thread #3380, what scale is your pilot and where you get him from?I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Originally posted by bmccool View PostAlmost ready to Maiden but have an issue with the right elevon servo, when powered up it wants to flutter for 10 seconds or so before it stops and operates normally on the bench? Is this an issue?
- Likes 1
Comment
-
Welcome to Hobby Squawk bmccool! Please be sure to read the TSB on this model before maidening...It's vital information. Happy Landings!
My YouTube RC videos:
https://www.youtube.com/@toddbreda
Comment
-
Thanks guys I did not glue the cover plates on just in case I needed to make any adjustments and now I am glade it did that. I will take the servos out as soon as the servo checker arrives from MRC this week and check everything while installing the 85MG servos. NOW the BIG question......What about the Blue BOX> Use it or loose it?
- Likes 1
Comment
-
My answer from the other forums. I did bypass on mine (except retracts and lights) because I used a 12ch receiver and plugged each surface into it's own slot for full span flaps, crow, tailerons, rudder airbrakes, etc. I'm also still (well over 100 flights) running the original servos...
There simply is no right answer. Even though I have never had a problem with any of the BB, smaller old ones or the newer MCBe ones, I have bypassed the critical functions on more than a few. But it was for more than one reason. On most of my planes I plug each flying surface servo into a slot on the receiver directly so I can have more adjustability and do some interesting mixes. On these I leave the retracts and lights on the box. But that said I have quite a few that still have the box in and used as designed. I also have a few that they have a single elevator or rudder servo going through the box for absolutely no reason so on those I bypassed just to reduce the number of connections.
Bottom line is everyone should do what they feel comfortable with. Many have yelled the sky is falling about the BB's and there have been documented failures
Comment
-
Originally posted by Stevonoles View PostI made it clear to Andrew in customer service that I was not looking to have the plane replaced. I just want some compensation. Maybe 200 or $100 in store credit or maybe just give me a new battery or something like that. I never asked for the plane to be replaced I never asked for anything to be warranted. I just think since I’ve spent thousands of dollars on airplanes in the last couple years with motion RC that they could do a little something for me. I’m in the business of selling a product that is manufactured and sometimes the manufacture does not want to step up and I have to do something for the customer to keep them happy. Sometimes it doesn’t take much just a little good faith.I would love to have somebody that could get a camera up there and help look for it but the problem is we have nobody in our club that has that capability. Also if we fly over this forest we are actually flying outside of our field which is a whole Nother issue. Thanks everybody for your comments and suggestions.
All the best
Rich
- Likes 1
Comment
-
Bmccool,be very careful making unapproved modifications. Many have had problems with this airplane. Motion RC will not stand behind this product. Document everything you do, video your first flight if possible. If you change any servos or leads or bypass the BB I would get approval from customer support before moving forward.
Comment
-
Thanks for the advice Stevonoles, I more than likely I have blown that by clear coating the aircraft to seal the decals. But I have a very good purchase record with Motion RC and have purchased several thousands of dollars worth products from them in the last 10 years. We will just have to wait and see what they say. I am going to take a video of the elevons as I turn on the transmitter if it comes out I will post it and see what they recommend. Thanks guys for all the advice. We Still need a S3 Viking twin fan in maybe 70mm along with an A7 or maybe an A-5 Vigilante!!
- Likes 1
Comment
-
Okay, I fibbed a bit. Pics are still of dry-fit with Pilot complete and Ejection Seat Complete. Still some weathering to do and addition of port Ejection Handle and Actuator Arm to fake canopy motor and rear mount...gettin' close though. Wooohoo and Whew! Oh, and Callie sent preview of Livery markings "so I got that goin' for me." Best, LB4 PhotosI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
That's an excellent job you did with that pilot.!! That site you mention is up for sale and not offering that pilot it seems. The guy that's suppose to be doing my pilot has not come through yet.
Comment
-
CDTrader is "Going Out Of Business"? Go Figure. Their business model is in Digital Property and redistribution of digital money. How can anyone screw that up? LOL. Just sayin'. You might check out Jet Hanger Hobbies pilot figures, those are great and that was my go to if this one didn't turn out well.
-
-
Originally posted by Elbee View PostOkay, I fibbed a bit. Pics are still of dry-fit with Pilot complete and Ejection Seat Complete. Still some weathering to do and addition of port Ejection Handle and Actuator Arm to fake canopy motor and rear mount...gettin' close though. Wooohoo and Whew! Oh, and Callie sent preview of Livery markings "so I got that goin' for me." Best, LB
Ugh.... I need to do my homework! THAT ROCKS!!!
Current Hanger: FW, F4.F22,F14, Byron T-6, Top Flite P-47, Top Flite P-40, Top RC P-51 H9 P-51, SebArt Avanti, Yellow aircraft Spitfire, T Jeti Extreme Flight EDGE, DS-24 Carbon,
Comment
-
Originally posted by Dustman View PostThat's an excellent job you did with that pilot.!! That site you mention is up for sale and not offering that pilot it seems. The guy that's suppose to be doing my pilot has not come through yet.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
SO, so, so good Elbee! Dang it all, now I am going to have to invest in a new set of patience and skill this new year to bling out my BA's "office"!My YouTube RC videos:
https://www.youtube.com/@toddbreda
- Likes 1
Comment
Comment