Originally posted by davegee
View Post
Announcement
Collapse
No announcement yet.
Official Freewing F/A-18C Hornet 90mm EDF Thread
Collapse
X
-
Hugh "Wildman" Wiedman
Hangar: FL/FW: Mig 29 "Cobra", A-10 Arctic, F18 Canadian & Tiger Meet, F16 Wild Weasel, F4 Phantom & Blue Angel, 1600 Corsair & Spitfire, Olive B-24, Stinger 90, Red Avanti. Extreme Flight-FW-190 Red Tulip, Slick 60, 60" Extra 300 V2, 62" MXS Heavy Metal, MXS Green, & Demonstrator. FMS-1700mm P-51, Red Bull Corsair. E-Flite-70mm twin SU-30, Beast Bi-Plane 60", P2 Bi-Plane, P-51.
- Likes 3
-
Originally posted by Hugh Wiedman View Post
SWEEEET Dave! Awesome looking bird and the cockpit knocks it outta the park!!
- Likes 1
Comment
-
Originally posted by InTheTubeDeep View PostElbee, Aros- apologies for my rants- the fact that this is a privately run group was lost in the reactions to my beach flying- As for FAA looking at your F4U blowing up and wondering if the hobby is too unsafe has to be a joke right? He must've been messing with you- if not I gotta say its truly disturbing that the FAA has nothing better to do than that!!
The FAA could care less about our feelings as RC pilots. They care about the safety of the US Airspace, period. They look at us, and civilian drone "pilots" (and boy do I use that term loosely) as nothing more than a threat to said airspace. Make no mistake, they are looking for any and every reason to sanction the hobby.
My YouTube RC videos:
https://www.youtube.com/@toddbreda
- Likes 2
Comment
-
Originally posted by InTheTubeDeep View PostElbee, Aros- apologies for my rants-I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Elbee View Post
ITTD, this would have been enough; however, apology appreciated/accepted. Respectfully, LB
Comment
-
For the Freewing F-18C, yes. The STL files are buried somewhere in this Official Thread. Like 10 sets or something. If I knew the post numbers, I'd tell you, but I don't. Probably easier to check the Prusa repository. It is called Prusa Printables I think, just search it there's only one. Search the User name: Stevie or Freewing I think works there. Best, LB
-
-
Originally posted by InTheTubeDeep View Post
All good- btw did you 3D design print that cockpit?
The F18 cockpit is a work of Art! Unfortunately the files are now highly classified and have been removed from public access by the military to keep China from stealing them.
I used the JHH 1/10 scale full body pilot in my F18 Canadian.
Never miss an opportunity to show it off
🤣
Hugh "Wildman" Wiedman
Hangar: FL/FW: Mig 29 "Cobra", A-10 Arctic, F18 Canadian & Tiger Meet, F16 Wild Weasel, F4 Phantom & Blue Angel, 1600 Corsair & Spitfire, Olive B-24, Stinger 90, Red Avanti. Extreme Flight-FW-190 Red Tulip, Slick 60, 60" Extra 300 V2, 62" MXS Heavy Metal, MXS Green, & Demonstrator. FMS-1700mm P-51, Red Bull Corsair. E-Flite-70mm twin SU-30, Beast Bi-Plane 60", P2 Bi-Plane, P-51.
- Likes 3
Comment
-
Originally posted by Hugh Wiedman View Post
LB's "unofficial" job is lead secret designer for the Skunk Works division. You should see his work on the 1600mm Corsair, complete with cockpit, moving canopy, functional cowl flaps and double wasp engine, just to name a few.
The F18 cockpit is a work of Art! Unfortunately the files are now highly classified and have been removed from public access by the military to keep China from stealing them.
I used the JHH 1/10 scale full body pilot in my F18 Canadian.
Never miss an opportunity to show it off
🤣
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Elbee View Post
Never gets old, Brother. That's why you are the Southeast Group Commander, your attention to detail combined with all the fun toys. Best, LB
- Likes 1
Comment
-
ID, Great addition to your BA Bug. The missile rails were an absolute requirement to this model, IMO. There were several designs floating around from both RCG and here early on. I, too, designed a rail but in 4-parts mostly to add some additional detail. The inner most NAV light part was my objective though mine does not light up like RCjetdude did to his Hornet. If you find those posts to his model, it is a masterpiece in both lighting and modification. He does great work. Best, LB
4 PhotosI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 2
Comment
-
Originally posted by Elbee View PostID, Great addition to your BA Bug. The missile rails were an absolute requirement to this model, IMO. There were several designs floating around from both RCG and here early on. I, too, designed a rail but in 4-parts mostly to add some additional detail. The inner most NAV light part was my objective though mine does not light up like RCjetdude did to his Hornet. If you find those posts to his model, it is a masterpiece in both lighting and modification. He does great work. Best, LB
- Likes 2
Comment
-
As I've mentioned in the past, both of my F-18's have had issues with one flap (not always the same one) not deploying while in flight (works fine on the ground even with holding them to see if they stop). Guess I'm lucky, but had the same issue on my Avanti and both of my B-24's. With those, I reduced the speed to 1 second or less and have never had the problem again. On both F-18's, even at 0 seconds, it sometimes occurred and unlike with the Avanti or B-24, when one doesn't go down to landing flaps and the other does, it's a "Fire Drill" trying to keep it from spiraling while offsetting with Ail and flipping the flap switch back up! So with both, I bypassed the circuit board wiring the ailerons and flaps directly to the RX and finally replaced both flap servos on each (I suspect the 9 gr servo's just don't have enough guts when in the air, but who knows). The only issue was I did not like plugging and unplugging ail/flaps every time out, which ultimately wears the connector out, so I just found a really nice alternative.
When building out my Extreme Flight FW 190, they use a multi wire servo plug for easy connection. Comes either for 3 servos or 2. So I put the 2 servo ones in each wing of both and now I'm happy as a clam. The side with the flange even fits nicely in the space where the ribbon connector was and mounts with 2 screws. The connection is much nicer than even the ribbon cables. If you have need of something like this, you can get them at Extreme Flight.
Don't they look Happy!
Hugh "Wildman" Wiedman
Hangar: FL/FW: Mig 29 "Cobra", A-10 Arctic, F18 Canadian & Tiger Meet, F16 Wild Weasel, F4 Phantom & Blue Angel, 1600 Corsair & Spitfire, Olive B-24, Stinger 90, Red Avanti. Extreme Flight-FW-190 Red Tulip, Slick 60, 60" Extra 300 V2, 62" MXS Heavy Metal, MXS Green, & Demonstrator. FMS-1700mm P-51, Red Bull Corsair. E-Flite-70mm twin SU-30, Beast Bi-Plane 60", P2 Bi-Plane, P-51.
- Likes 2
Comment
-
[QUOTE=Hugh Wiedman;n350901]As I've mentioned in the past, both of my F-18's have had issues with one flap (not always the same one) not deploying while in flight (works fine on the ground even with holding them to see if they stop). Guess I'm lucky, but had the same issue on my Avanti and both of my B-24's. With those, I reduced the speed to 1 second or less and have never had the problem again. On both F-18's, even at 0 seconds, it sometimes occurred and unlike with the Avanti or B-24, when one doesn't go down to landing flaps and the other does, it's a "Fire Drill" trying to keep it from spiraling while offsetting with Ail and flipping the flap switch back up! So with both, I bypassed the circuit board wiring the ailerons and flaps directly to the RX and finally replaced both flap servos on each (I suspect the 9 gr servo's just don't have enough guts when in the air, but who knows). The only issue was I did not like plugging and unplugging ail/flaps every time out, which ultimately wears the connector out, so I just found a really nice alternative.
When building out my Extreme Flight FW 190, they use a multi wire servo plug for easy connection. Comes either for 3 servos or 2. So I put the 2 servo ones in each wing of both and now I'm happy as a clam. The side with the flange even fits nicely in the space where the ribbon connector was and mounts with 2 screws. The connection is much nicer than even the ribbon cables. If you have need of something like this, you can get them at Extreme Flight.
/QUOTE]
Hugh, great idea. I will be updating all the wiring in my 'bug' this winter. I just don't like my lighting layout either. There's got to be a neater and more efficient layout. Best, LBI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
The slow down issue is another thing. I think for the F-18 the servos on flaps are just borderline powerful enough and at speed the forces are too much for the little servo. Also some set it up with more travel and there could be binding of the flap on the side of the fuselage.
When I set up mine I moved the pushrod in on the servo for better mechanical advantage and have had no issues.
- Likes 2
Comment
-
I also have the exact same problem with my flaps.
It has resulted in me always landing with take off flaps. Because it has always worked. I'm going crazy when I can't find the error. I thought this error was solved with V2 of this F18 but apparently not. But you may have to change to a stronger servo or change to the inner hole on the servo arm?
Comment
-
I couldn't help myself. I am a glutton for punishment as they say. Welcome home #8. Yes, as in my 8th Freewing F/A-18C Hornet. It was a deal I couldn't pass up. This was my buddy's pride and joy. He is intensely meticulous with his models (even came with wing AND stab bags). He said this one flew "right" out of the box. Zero issues or gremlins, no trouble at all. Perfectly dialed in and comes with a Spektrum gyro that works flawlessly. I'm going to upload his .SPM file so I will have his exact setup and settings. So now, if the unthinkable occurs, I will have nobody to blame but Mr. Dumb Thumbs. I also told him if the unthinkable DOES happen, I will never tell him and move to another state.
Bonus points, she fits in my Toyota Supra!!
3 PhotosMy YouTube RC videos:
https://www.youtube.com/@toddbreda
- Likes 3
Comment
-
Aros Congratulations. "This time for sure...", he said. (Insert ROFL emoji, if I had one ???) In the mean time, insert Archer GIF. Best LB
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
In some parallel universe my friend, I'm almost certain the common phrase is "Eighth time's the charm!"My YouTube RC videos:
https://www.youtube.com/@toddbreda
- Likes 2
Comment
Comment