Yes she flies like on rails. I land with high alpha attitude and full flaps for a less long rollout but it is very long without full flaps. The only problem is heavy cross winds where I often get a wingtip drag cos that big rudder gets pushed around. I just put wingtip skids on and no problem.
Announcement
Collapse
No announcement yet.
Official Freewing 80mm EDF F-86 Sabre Thread
Collapse
X
-
Most probably your lipo battery. I know several people with this plane and all get AT LEAST 4 full minutes of mixed flying on 6S-5000's. One guy gets 3.5 minutes on a 4000 so all other things being equal, it leaves the battery. Taking off ordinance will also help a bit. Also, I have two 6S-5000 lipos from two different makers and I never had to carve any foam. I just dropped the ESC down in the air stream and put the battery all the way back in the compartment and all fits well. I even have a 130 amp ESC in mine when I upgraded to FMS 3270-2000 motor/fan combo.Originally posted by roys001 View PostI've had My F-86 for about a month. I'm running the 6s 5000mah battery. Carving out the canopy was not a problem. For me however My flight times seem to be limited to 3 minutes. The plane flys great. Like already mentioned wind is just not an issue. I've started practicing a steeper approach angle with flaps in light winds and I'm getting some nice squeaker landings. I have noticed though that the tires are getting flat spots on them. I'm wondering if anyone else is having that problem?
Comment
-
It took me only one evening, I don’t remember the details now but it was very minor and really just a drop in. Really noticeable upgrade, 15% more power I would guess. Sound is as good or better too. I did have to rearrange for the bigger esc but it all worked with no big mods.Originally posted by Kokopellimusic View Post
Did you have to do any carving to change out the motor to the FMS? I've read that's a great combo on this jet.
Comment
-
the fms 2000kv fan and a freewing 100a esc in mine really made a difference...batteries and esc come in barley warm after 3 to 4 min highly recommend it...you do need to cut a slight bit of foam at the rear of the fan housing...very little easy install...make sure u get the 100a or bigger esc..
Comment
-
very minor foam removal but huge upgrade in performance!!Originally posted by Kokopellimusic View Post
Did you have to do any carving to change out the motor to the FMS? I've read that's a great combo on this jet.Check me out on youtube at https://www.youtube.com/user/gooniac33
I am an RC addict and innovator that loves to share my knowledge with those that need help. Ask me anything via PM if you need help! Check out my Website here https://www.gooniac33.me/
Comment
-
The Tamiya chrome silver X-11 is a good match for me.Originally posted by Kokopellimusic View PostHey guys, have any of you found a good silver paint match for touch ups? Thanks.Lon
EFlite F-16 80mm, EFite DRACO, EFlite Night Radian, E-Flite P51 1.5m
Freewing A-10 80mm, F-86 80mm, F-15 90mm, F-16 90mm. Avanti. FMS DHC-2 Beaver, Fliteline P-38L ,HSD HME-262, HSD F86.
Comment
-
I have not but I have flown mine with the RC Jetwerks 5300 60c and it flew fine but it was a little heavy. I think the Admiral 4500’s work well.Originally posted by flyinhigh042 View PostHey everyone. Admittedly, I’m being a little lazy here. Rather than researching and reading 21 pages in this forum, I’m wondering if anyone has flown the F 86 with the Admiral 5000 6S pack? Is it too heavy? Or will it work? Thanks for the input!
- Likes 1
Comment
-
Shouldn't be a problem I would think, I fly mine all the time with Gensace 5000 60c pks, it handles it just fine, I fly a little nose neavy anyway on all my jets so it flies just fine and lands like a trainer, I can grease it right in on the mains with the drop tanks on.:Cool:Originally posted by flyinhigh042 View PostHey everyone. Admittedly, I’m being a little lazy here. Rather than researching and reading 21 pages in this forum, I’m wondering if anyone has flown the F 86 with the Admiral 5000 6S pack? Is it too heavy? Or will it work? Thanks for the input!
- Likes 1
Comment
-
I'd like a little more speed for fluid aerobatics I've got a few FW power systems to include a 6 blade and 9 bladed fan. Has anyone had success using another FW power system set up in their F-86. Keep in mind I've been flying this one since about 2015 stock so not sure if they upgraded the power system for the ones they sell now...:Confused:
Comment







Comment