Any little bit helps. Good luck and good flying
Announcement
Collapse
No announcement yet.
Official Dynam 1500mm B-26 Marauder Thread
Collapse
X
-
Originally posted by weedsnager View PostAnyone have pictures of the shim mod ?
Comment
-
Originally posted by weedsnager View PostIs the entire shim 3mm or is it tapered?
Comment
-
Yes..3700 45c roaring tops 400g. Mixed half to 3/4 throttle. Full throttle on take off,climb out,ALE rolls. 7min flights. avg 3.7-3.8v per cell on landing. Also fly chinahobbyline 4s 4000 40c 451g 8min avg 3.7-3.8v per cell. 8min flights. Batts are cool to barely warm.Still flying P.15, avanti(#2), mig 21, yak 130 70mm(#2), f35, f9f panther, a10 64mm, F8 crusader/ PA ultimate amr /HK skipper, durafly dh vampire, p 51,spit mk24, corsair, flybeam/ BH f86 50mm, deltawing 50mm/ HH su 26 mm,umx pitts,umx sbach, blade nano cp s,blade 450x, inductrix 200, inductrix pro, umx yak 54,umx f27 fpv/ electrifly 4s L39/ flyzone beaver/ volantix asw 28, /dynam B26
RIP.. roc hobby waco,strega #2(you will be missed), Fw 90mm eurofighter.
Comment
-
wow... Ive been holding off on this plane,mainly because of funds.. but after read whats been discovered so far..Im glad I haven't ...now, I can see these issues have solutions, but wow, that's ALOT! to have to fix that should have been dealt with before production...I'm sorry to see these issues were discovered at the loss of peoples purchases. Ive only had one Dynam plane, and didn't like it much either..so sad to see its them that made the P61 ..I surely hope Flightline will still make one thoughwww.TSHobbies.com
Hobby Paint racks and acrylic display stands for collectibles.
Comment
-
Originally posted by Mad Baron View PostTook mine to the club field taxi test good lined up on runway center advanced the throttle to max power ready to rotate spun to the left tore up the landing gear, cowl and prop.
Comment
-
TS..its true you do have to go thru the airplane to fix or check multiple things (more than most)but it is less work than it sounds like and most of it is not uncommon eben on flightline birds(needed up ELE on the p38 incedence problem, loose control horns on the avanti, cold solder joint on a motor connector cost me my p38, ) It is a good flying model with great flight characteristics when set up properly (like any aircraft). For a price point,only one of its kind aircraft its worth the work. It looks so cool on a blue sky day, flying across the clouds. I do wish the quality control was better. With MRC involment i expect it will.Still flying P.15, avanti(#2), mig 21, yak 130 70mm(#2), f35, f9f panther, a10 64mm, F8 crusader/ PA ultimate amr /HK skipper, durafly dh vampire, p 51,spit mk24, corsair, flybeam/ BH f86 50mm, deltawing 50mm/ HH su 26 mm,umx pitts,umx sbach, blade nano cp s,blade 450x, inductrix 200, inductrix pro, umx yak 54,umx f27 fpv/ electrifly 4s L39/ flyzone beaver/ volantix asw 28, /dynam B26
RIP.. roc hobby waco,strega #2(you will be missed), Fw 90mm eurofighter.
Comment
-
Mad baron.. i am having good success with mine,Cg of 60mm, 1/2 flaps on take off, slowly accelerate to wot. I had issues with QC like most(all?). Addressed issues as noted on this thread. My first flight i didnt have 2mm up ELE and almost ran out of up trim. Also had a Cg at 50 ish mm. I did start with ELE travel at 1/2inch travel. I am still flying without the stab mod as it is not a necessity but plan on doing it (i like the idea of "cleaner"aerodynamics.) Are your wheels ok? A hub on my mig 21 melted on my first highspeed taxi test,made it veer off centerline.Still flying P.15, avanti(#2), mig 21, yak 130 70mm(#2), f35, f9f panther, a10 64mm, F8 crusader/ PA ultimate amr /HK skipper, durafly dh vampire, p 51,spit mk24, corsair, flybeam/ BH f86 50mm, deltawing 50mm/ HH su 26 mm,umx pitts,umx sbach, blade nano cp s,blade 450x, inductrix 200, inductrix pro, umx yak 54,umx f27 fpv/ electrifly 4s L39/ flyzone beaver/ volantix asw 28, /dynam B26
RIP.. roc hobby waco,strega #2(you will be missed), Fw 90mm eurofighter.
Comment
Comment