RG I would like a copy of your canopy bow design to. You can never have too many parts........
Announcement
Collapse
No announcement yet.
Official 3DP Thread
Collapse
X
-
Originally posted by Dustman View PostSo I need to go back to post #761 and recopy that file? All of the files up to post #745 I just sent off to get made a couple of days ago. I should be getting them back in about a week or so.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Originally posted by Dustman View PostKoool, I gotcha. When I get the first set of parts, I will lay them out and post pic's.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
This is the list that Dirty Dee is producing for me at the moment:
"LB_Parachute_Back_Panel_F-18C_0.15mm_PLA_MK3"
"F18 Canopy Actuator Motor"
"F-18C Canopy Connecting Rod"
"F-18C Canopy_Rails_w_Pit_Frame_v4a"
"F-18C Center Instrument Cluster"
"F18C Clear Mesh Final v2"
"F-18C HUD Base w Lens_Camera v2"
"F-18C HUD Frame v1"
"F-18C Instrument Panel-Full"
"F-18C Joystick Full Build v3"
"F-18C LH Console v4"
"F-18C RH Console v4"
"F-18C The_Pit_Final"
"F-18C Tub_v8"
"LB Cockpit Set F-18C Throttles"
"LB Non-Ejection Seat LH Cylinder"
"LB Non-Ejection Seat Panel at Frame Above Seat"
"LB Non-Ejection Seat Parachute Strap Print 2 of These"
"LB_Ejection_Seat_and_Seat_Frame_F-18C_0.15mm_PLA_MK3"
"LB_Headrest_and_Top_Panel_F-18C_0.15mm_PLA_MK3"
"FW F-18 90mm - HUD Base"
"FW F-18 90mm Cockpit Coaming v2"
"FW F-18 90mm HUD Frames v2"
"FW F-18 90mm LEX Fence Base v1" 2 of these
"FW F-18 90mm LEX Fence v1" 2 of these
"FW F18-Main Wheel Cover v1" 2 pairs
I think these are all the parts from thread 708 to thread #745. I'm not sure this includes anything after it. The printer you mentioned is nice but too expensive for my pocket book. I was looking at the Creality Ender 3/Ender 3 Pro/Ender 5/CR-20 Pro/CR-X/CR-10S Pro 3D Printer DC 24V. What do you think?
Comment
-
Hey F-18C Owners' Society, These are the corrected Canopy Bow Frame STL Files which include the original Bow by Radar-Guy which fits great and the v3 updated version he and I worked on together. The file has a printable 'full-version' and a printable 'parts version' depending on your preferences. As always, let me know through this forum if you have a fit issue or a fix or a version you've modded. I think we are all served when we mod and share a better version of any of these files. Building a better 'mouse-trap' so to speak. Best, LB
[ATTACH]n219625[/ATTACH]
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Dirty Dee View PostThanks!
It was radar guys coaming. I am rotating it 90 degrees to print similar to the A10 coaming I made. I think that should do.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Help! Okay 3DP gang, I need some advise. My poorer prints were most definitely due to my old 'worn' .4mm nozzle. I changed it out yesterday for a new .4mm and it's all good, BUT I also bought some other sized nozzles and just had to try the .3mm. This morning I am printing the F-18C Front IP (some more) with the .3mm and I want some recommendations on slicer settings. I own a Prusa i3 Mk3 ("S" Upgrade is in the mail, WooHoo!) I thought there were "Presets" in the Prusa PE slicer app, but if those are there, I didn't find 'em. I looked on the interwebb-thingie but the advise seems vague, i.e., %s vs diameter etc., with little explanation. So has anyone some experience here with the 'advanced and expert' settings for detailed prints with a .3mm nozzle? I'd appreciate some preset for PLA, but ABS works, too. Thanks in advance. Best, LBI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
What am I doing wrong guys? Every time I try to download the stl file it shows up as a http file and when o try to open it says something about not being allowed to be hobby squawk. I gues the more direct question is “what are the steps to download the files. Thanks for the help. About to order the Freewing 90mm F-18 and want to be ready when it arrives.
Comment
Comment