Have any of you guys designed a HUD frame for the F-22? I just got a Yellow Aircraft F-22 turbine that came with a cockpit, but it is woefully not scale. I'd like to use the FW F-22 3DPUP files to make a scale cockpit, but of course a HUD frame was not included in the files as you were to just use the one provided in the kit.
Announcement
Collapse
No announcement yet.
Official 3DP Thread
Collapse
X
-
Originally posted by Daneflyer View PostWhat am I doing wrong guys? Every time I try to download the stl file it shows up as a http file and when o try to open it says something about not being allowed to be hobby squawk. I gues the more direct question is “what are the steps to download the files. Thanks for the help. About to order the Freewing 90mm F-18 and want to be ready when it arrives.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Originally posted by Daneflyer View PostWhat am I doing wrong guys? Every time I try to download the stl file it shows up as a http file and when o try to open it says something about not being allowed to be hobby squawk. I gues the more direct question is “what are the steps to download the files. Thanks for the help. About to order the Freewing 90mm F-18 and want to be ready when it arrives.
Comment
-
LB, in post #768 is that the HUD Base w lens and camera v2, HUD frame v1, RG's Cockpit Coaming, full instrument panel and center instrument cluster I see in your picture? From what I compared to my list it seems I'm going to have to go back to DD and get a few small items I left off my list like the files you and RG did for the Canopy Bow. Where can I get some 3D bombs like the ones attached on the model?
Comment
-
If you go to Thingiverse.com and type in Freewing in the search block, you will find several type of stores available.
Originally posted by Dustman View PostLB, in post #768 is that the HUD Base w lens and camera v2, HUD frame v1, RG's Cockpit Coaming, full instrument panel and center instrument cluster I see in your picture? From what I compared to my list it seems I'm going to have to go back to DD and get a few small items I left off my list like the files you and RG did for the Canopy Bow. Where can I get some 3D bombs like the ones attached on the model?
Comment
-
Originally posted by Dustman View PostLB, in post #768 is that the HUD Base w lens and camera v2, HUD frame v1, RG's Cockpit Coaming, full instrument panel and center instrument cluster I see in your picture? From what I compared to my list it seems I'm going to have to go back to DD and get a few small items I left off my list like the files you and RG did for the Canopy Bow. Where can I get some 3D bombs like the ones attached on the model?I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Dirty Dee, So he is covered either way, well done. On another note, did you understand the way I designed this? Point being, can this be built easily? i know how I will assemble things, though that doesn't mean the next guy will do it the same way, if you get my drift. best, LBI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Elbee View PostOn another note, did you understand the way I designed this? Point being, can this be built easily? i know how I will assemble things, though that doesn't mean the next guy will do it the same way, if you get my drift. best, LB
- Likes 2
Comment
-
Originally posted by crxmanpat View PostHave any of you guys designed a HUD frame for the F-22? I just got a Yellow Aircraft F-22 turbine that came with a cockpit, but it is woefully not scale. I'd like to use the FW F-22 3DPUP files to make a scale cockpit, but of course a HUD frame was not included in the files as you were to just use the one provided in the kit.
Please provide a drawing with some dimensions, I’ll look into it.
- Likes 2
Comment
-
Finally got my parts in. I still need to order the Canopy Bow files. The HUD set to the upper left did not fit the coaming. The pieces that are above it did.The base ejection seat sits on a flat base; slightly different than the one in thread. That's no biggy though. It can be built up to be even with the control panels. The 1/10th scale JHH pilot is too big. I 'm in the market for a 1/11th/ 1/12th scale full body jet pilot. Anybody know where I can get one from? Anyway, overall the cockpit set is sweet and would be a nice addition to your jet. I'll post some pic's when I get it together. Can I get the exact page in Thingeeverse where I can find additional weapons for Freewing Jets?2 Photos
- Likes 2
Comment
-
Originally posted by Dustman View PostFinally got my parts in. I still need to order the Canopy Bow files. The HUD set to the upper left did not fit the coaming. The pieces that are above it did.The base ejection seat sits on a flat base; slightly different than the one in thread. That's no biggy though. It can be built up to be even with the control panels. The 1/10th scale JHH pilot is to big. I 'm in the market for a 1/11th/ 1/12th scale full body jet pilot. Anybody know where I can get one from? Anyway, overall the cockpit set is sweet and would be a nice addition to your jet. I'll post some pic's when I get it together. Can I get the exact page in Thingeeverse where I can find additional weapons for Freewing Jets?
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Don't know what I am doing wrong while in Thingeeverse. When type in Freewing f18 I get the home page with artist to follow halfway down the page. Also, LB are you going to do a file for the OEM shroud/ coaming you are for your HUD? I'll have a pic for you in a couple of days on how the parts fit. It difficult for me to see how DD coaming over the instrument panel from your picture in the previous thread. The files listed below are the remaining files for now I need DD to do for me. For some reason I was not able to get the GBU 38 file to load. A message came up saying it exceeded the limit by1.91 MB. for file size. The one file I can't find right now I would also like is the center pylon by DD.Attached Files
Comment
-
Dustman, Here are some screen captures that might help you. Remember that Radar-Guy's Shroud/Coaming requires that you cut off the foam forward of the IP. RG's HUD Assembly fits his Shroud/Coaming as does his Forward IP. If you printed my version of the HUD and Forward IP, these will not fit RG's Shroud. My IP Shroud requires the use of the OEM Shroud, though it is cut back to match the 3DP Shroud. Best, LB
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
DD printed your version of the HUD and Forward IP for me. And you are right they do not quite fit RG's Shroud. If I can get a copy of the file of your Shroud/ OEM Shroud to, though it is cut back to match the 3DP Shroud that would be great. Also, I still need the four files listed above made for me to complete my cockpit. If the pieces in #793 are yours to that is what I need to. I've put part of the cockpit together.
Comment
-
Originally posted by rifleman_btx View PostFinally decided to finish the corsair build...got the fuse finished yesterday.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Dustman View PostDD printed your version of the HUD and Forward IP for me. And you are right they do not quite fit RG's Shroud. If I can get a copy of the file of your Shroud/ OEM Shroud to, though it is cut back to match the 3DP Shroud that would be great. Also, I still need the four files listed above made for me to complete my cockpit. If the pieces in #793 are yours to that is what I need to. I've put part of the cockpit together.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
Comment