Okay I'll be the slow one for the day that says it:
What rail are you referring to?
What rail are you referring to?
-
My YouTube RC videos:
https://www.youtube.com/@toddbreda -
Good morning Bro!!! Bob is talking about the canopy frame thickness where the opening (moving) section of the canopy meets the windscreen (fixed) portion of the canopy. Reference his side view of the BA 18 and then look at the Freewing frame... Not to scale... Hope this helps!!!!
Jerry
Comment
-
This...….Comment
-
-
Once I get the elevators and electronics sorted out, then the canopy is next!!!
Comment
-
Check me out on youtube at https://www.youtube.com/user/gooniac33
I am an RC addict and innovator that loves to share my knowledge with those that need help. Ask me anything via PM if you need help! Check out my Website here https://www.gooniac33.me/Comment
-
All of my servos just landed on my door step. I am switching them all out just to be safe. Its just a little extra peace of mind! I will inspect and keep them as back ups but wanting true digital all metal gear servos...Just took my Blue Angels elevator servos out to check for frayed wires and found the reverse servo has been cut, elevator mounts are good, sure glad I stopped flying it until I had time to check them, got 39 flights out of that frayed servo wire.........
My grey one is grounded until I can get to it and find out if I find another bad servo wire on it.Check me out on youtube at https://www.youtube.com/user/gooniac33
I am an RC addict and innovator that loves to share my knowledge with those that need help. Ask me anything via PM if you need help! Check out my Website here https://www.gooniac33.me/Comment
-
Mislabeled Air Force, but a lot of Hornet love in this video including a bunch of the tails people have done on the Freewing birds.
Comment
-
Yeah, I dug through my stash of parts and found 2 brand new all metal geared servos, if I remember right, I got replacements for one of my jets but didn't use them, so I put them in my BA F-18 and ordered two more for my grey Hornet, found a bad one on it to, it was cut really bad.Comment
-
I think that the D85-MG has replaced the 5085. Same size, a little less torque and 4 metal/1 nylon versus 5 metal. I have a few 5085s NIB so might use those. Also considering the E-Max ES-3054 which have been 100% in my useage. Just bought some new 17gm Freewing and they have the silver output shaft so are they considered all metal and of the latest revisions ?Comment
-
Hey Radar-Guy, what ever became of the instrument panel and HUD parts you were working on?Comment
-
I just found some FW 17g all metal geared sevos with the silver shaft and I purchased some more to replace the gold shafted ones I had which are hybrid. so when I get a bad silver shaft servo I want to take them both apart and see the difference, someone may have already checked?Comment
-
Hey Steve,
Here’s what I have for my F-18. The plan is to fly her first with the stock cockpit, Schuebeler AXI 51 HDS 1400kv on 10s 4500. Depending on the final battery location, I plan to design a complete cockpit with the floor as deep as possible. Files will be released when everything is ready.
My Hornet came with two faulty wing servos, replacements from MRC EU are on the way.
Comment
-
Frank, you are amazing!
Hey Steve,
Here’s what I have for my F-18. The plan is to fly her first with the stock cockpit, Schuebeler AXI 51 HDS 1400kv on 10s 4500. Depending on the final battery location, I plan to design a complete cockpit with the floor as deep as possible. Files will be released when everything is ready.
My Hornet came with two faulty wing servos, replacements from MRC EU are on the way.
Comment
-
Hurry up and get it done man! My entire build hinges on you..... Just kidding of course.
Comment
-
WILCO! How about some LERX fences?
Comment
-
How about YES!Comment
Comment