Announcement
Collapse
No announcement yet.
Official Freewing 90mm F-4 Phantom II Thread
Collapse
X
-
Originally posted by RCjetdude View PostA little airbrush work and Chris Wolfe's exhaust nozzles.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Bobaroo View PostYou know of anyone out there working on a 3DP TailHook for this one yet ?? We sure could use an Upgrade there as well. CheersI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Originally posted by Elbee View Post
BBR, Page 143, this forum. Will post final pics when completed. Method and stl files, too. Best, LB2 Photos
Comment
-
Originally posted by Bobaroo View Post
Ahhhhhh .. Yes I see that one. I remember you posting there were revisions in the works on that. Can those Tips be made as a separate part (Replaceable) on there ?? I can see them getting Ground Down upon Landing ... also is there a way to make it in Left and Right halves so the center of the hook can house a Hardened Beam of CarbonFiber or Plywood ?? That would make it Perfect for my signature Hook Down Landings !! I use a light Compression reflex spring on the Control Rod so there is Downward Pressure on the Hook yet I get a bunch of travel out of it when deployed. Mixing Hook to Flaps works great and with some creative Programming, I can get it to drop only with Full Flaps, leaving my TakeOff Flap setting relatively 'HookLess' !! Works great !! Looks Cool !! but the Ends get destroyed rather quickly. Please Post what you've got if you can ... Then I'm gonna BugYa to have you make me a couple of them. Cheers
I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
-
Originally posted by Elbee View Post
BBR, You crack up. LOL Yeah, the hook is a separate piece as I was thinking the same thing. (Also, had to go through several 3DP protos to get one that I liked. It is designed in 3 parts: 1) the pivot base (for lack of a better term), 2)Arm, 3)Tailhook. I used a micro servo, sheath/cable with a 'sphere' on the end that slides inside an angled cylinder column in the 3DP pivot base. The pivot base is hinged to the A/C. There is a compression spring in the cylinder that acts as the equalizer and pushes the pivot base down inside the column and gives some 'spring-back' motion for landing. In the up position, the sphere pulls the pivot base flush taking the pressure off the spring. I've got a little servo buzz, so figure I'll use the 'knob' on the TX to activate it. As far as parts, I'm not confident my designs would meet the standards being set here by the likes of DD, apmech1, RCJD, and others. My stuff is a bit clunky in that circle. LOL Best, LB
Comment
-
Originally posted by Woodcock View PostHey Dude,
All the Phantom tail hooks I have ever seen, (Key Words, "I have ever seen"). Were painted black and white striped. FYI
Woody
Comment
-
Originally posted by Bobaroo View Post
I think you're mistaken on this one Woody. I've never seen one in anything other than Raw Metal ... Ever !! And I've seen them all !! Hahahaha . Cheers
Woody
Sometimes it's best to be silent and thought a fool, than open your mouth and remove all doubt. LOL
- Likes 1
Comment
-
Originally posted by RCjetdude View PostClunky? Hardly! :Smug:I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Woodcock View PostHey Dude,
All the Phantom tail hooks I have ever seen, (Key Words, "I have ever seen"). Were painted black and white striped. FYI
Woody
This F-4 Phantom some black and white on the tail hook. Again just saying.
Comment
-
Originally posted by Elbee View Post
BBR, You crack up. LOL Yeah, the hook is a separate piece as I was thinking the same thing. (Also, had to go through several 3DP protos to get one that I liked. It is designed in 3 parts: 1) the pivot base (for lack of a better term), 2)Arm, 3)Tailhook. I used a micro servo, sheath/cable with a 'sphere' on the end that slides inside an angled cylinder column in the 3DP pivot base. The pivot base is hinged to the A/C. There is a compression spring in the cylinder that acts as the equalizer and pushes the pivot base down inside the column and gives some 'spring-back' motion for landing. In the up position, the sphere pulls the pivot base flush taking the pressure off the spring. I've got a little servo buzz, so figure I'll use the 'knob' on the TX to activate it. As far as parts, I'm not confident my designs would meet the standards being set here by the likes of DD, apmech1, RCJD, and others. My stuff is a bit clunky in that circle. LOL Best, LB
- Likes 1
Comment
Comment