The first picture is where I fly with these heavy (858 gram) long bricks, which are about the same dimensionally as your 6000's. It won't be exact given the weight difference and difference between planes, but might give you a place to check.
The MCB (Blue Box) wouldn't allow this normally, I relocated mine under the tray.
In the second picture, my CG location is approximately (finger tips) between the plastic attachment point for the wing and the panel line behind it and near where the factory applied too much glue in this photo.
My location is not super precise and also not super critical to being able to get to V(r) or V(rot) in this plane as long as you're not too far one direction or another.
The MCB (Blue Box) wouldn't allow this normally, I relocated mine under the tray.
In the second picture, my CG location is approximately (finger tips) between the plastic attachment point for the wing and the panel line behind it and near where the factory applied too much glue in this photo.
My location is not super precise and also not super critical to being able to get to V(r) or V(rot) in this plane as long as you're not too far one direction or another.
Comment