Official Freewing Twin 80mm/90mm A-10 Thunderbolt II Thread

[RCjetdude]

Check the backside of the connector in the wing.

[cybersarg]

I checked the wiring last night and verified it with the manual, as far as i can tell it is plugged into the right place, I also checked the ribbon cable, I was thinking the Circuit board is soldered incorrectly. I will use a y connection for now until I can figure this out.

[cybersarg]

Guy's i explained this Flap problem to Motion RC and they sent me a complete electronic board package, I will keep you updated.
Motion RC A+++++++++ fast reply and resolution.

[Dirty Dee]

Hey all,

I decided to upload my cockpit set STL files to Cults3D for anyone who owns a printer and would want to 3DPUP their cockpits with a new gator-proof office.

Link to the web-page. Download is listed at $20:
https://cults3d.com/en/3d-model/game...le-cockpit-set

Note: Cults3D takes a 20% commission (4$) for each download. If you would prefer to purchase the files directly to show support, you can PM me and purchase the files directly. This method I would email you a zip file.

[crxmanpat]

Just messing around on a beautiful Arizona day hunting ISIS. ;)

[Hardway]

Just beautiful!!! :Cool:

[purduephigam]

Love this jet. Love seeing everyone enjoy it as much as I do. Can't wait for weather to improve to get mine back up hunting bad guys.

[Hardway]

Hey all,

I decided to upload my cockpit set STL files to Cults3D for anyone who owns a printer and would want to 3DPUP their cockpits with a new gator-proof office.

Link to the web-page. Download is listed at $20:
https://cults3d.com/en/3d-model/game...le-cockpit-set

Note: Cults3D takes a 20% commission (4$) for each download. If you would prefer to purchase the files directly to show support, you can PM me and purchase the files directly. This method I would email you a zip file.

Got my ZIP file from DD via email. All downloaded fine and looks good!! Thanks again for all the great design work!! Jerry

[Hardway]

Love this jet. Love seeing everyone enjoy it as much as I do. Can't wait for weather to improve to get mine back up hunting bad guys.

The colors match the ice-laden trees!!! Very cool Bro!!! Nice....

[MikeT]

Just beautiful!!! :Cool:

+1. I never get tiered of seeing shots like that.

Mike

[e4dragongunner]

Spectacular photos! REALLY NICE!

[Twowingtj]

Certainly love flying mine. Come on Spring! We just got 14" of snow and more coming.

[Dirty Dee]

Finally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware. Anyone with a 3D printer can download the STL files from my cults3d profile:

https://cults3d.com/en/3d-model/game/1-10th-scale-bru-42-triple-ejector-rack

I can also 3D print these in ABS for $12 per TER. PM me if interested.

[Rcfiddy1]

Once again very nice work..

[MikeT]

Finally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware. Anyone with a 3D printer can download the STL files from my cults3d profile:

https://cults3d.com/en/3d-model/game/1-10th-scale-bru-42-triple-ejector-rack

I can also 3D print these in ABS for $12 per TER. PM me if interested.

Slick.

Mike

[e4dragongunner]

Finally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware. Anyone with a 3D printer can download the STL files from my cults3d profile:
https://cults3d.com/en/3d-model/game...e-ejector-rack

I can also 3D print these in ABS for $12 per TER. PM me if interested.

JUST Fantastic work! :-)

This Foam revolution has really brought back my modeling skills from yester- year!
For a lot of guys 20 years ago... it more an either or( RC / Plastic Static modeling) ... with a bit of bleed over.. NOW..... with such a high quality, high performance, wide variety and with the advent fo 3D printing the two hobbies have really melded quite nicely!

[Elbee]

Finally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware.

DD, Every little thing you do is 'magic'...LOL Got 'em and Thanks some more. Best, LB

[Dirty Dee]

Thanks guys!

I'm sure several people have accidentally tipped a wing and broke their sidewinder rail adapter, so I made a replacement. Figured I should do it while mine is still in one piece :)

https://www.thingiverse.com/thing:3372292

[Elbee]

Thanks guys!I'm sure several people have accidentally tipped a wing and broke their sidewinder rail adapter, so I made a replacement. Figured I should do it while mine is still in one piece :)https://www.thingiverse.com/thing:3372292

DD, GeeWhiz, Man, do you even have a social life? LOL LOL LOL Thank you and yes I have 'Foam Tac' -ed mine once already. Best, LB

ps: printing your TER as I write, too cool for school

[Dirty Dee]

DD, GeeWhiz, Man, do you even have a social life? LOL LOL LOL Thank you and yes I have 'Foam Tac' -ed mine once already. Best, LB

ps: printing your TER as I write, too cool for school

LOL, 3D modeling helps keep away the cabin fever when the snow keeps me from flying.

Havent flown in over 2 months now, cant wait for spring