Check the backside of the connector in the wing.
Announcement
Collapse
No announcement yet.
Official Freewing Twin 80mm/90mm A-10 Thunderbolt II Thread
Collapse
X
-
Hey all,
I decided to upload my cockpit set STL files to Cults3D for anyone who owns a printer and would want to 3DPUP their cockpits with a new gator-proof office.
Link to the web-page. Download is listed at $20:
https://cults3d.com/en/3d-model/game...le-cockpit-set
Note: Cults3D takes a 20% commission (4$) for each download. If you would prefer to purchase the files directly to show support, you can PM me and purchase the files directly. This method I would email you a zip file.1 Photo
- Likes 3
Comment
-
Originally posted by Dirty Dee View PostHey all,
I decided to upload my cockpit set STL files to Cults3D for anyone who owns a printer and would want to 3DPUP their cockpits with a new gator-proof office.
Link to the web-page. Download is listed at $20:
https://cults3d.com/en/3d-model/game...le-cockpit-set
Note: Cults3D takes a 20% commission (4$) for each download. If you would prefer to purchase the files directly to show support, you can PM me and purchase the files directly. This method I would email you a zip file.
- Likes 1
Comment
-
Finally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware. Anyone with a 3D printer can download the STL files from my cults3d profile:
BRU-42 Triple Ejector Rack modeled for the 1.7m Freewing A-10 Thunderbolt II. Modeled to utilize the stock Freewing attachment hardware: https://www.motionrc.com/products/freewing-f-16c-90mm-weapons-attachment-hardware Refer to images for trimming requirements on the Freewing attachment hardware.
I can also 3D print these in ABS for $12 per TER. PM me if interested.6 Photos
- Likes 5
Comment
-
Originally posted by Dirty Dee View PostFinally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware. Anyone with a 3D printer can download the STL files from my cults3d profile:
BRU-42 Triple Ejector Rack modeled for the 1.7m Freewing A-10 Thunderbolt II. Modeled to utilize the stock Freewing attachment hardware: https://www.motionrc.com/products/freewing-f-16c-90mm-weapons-attachment-hardware Refer to images for trimming requirements on the Freewing attachment hardware.
I can also 3D print these in ABS for $12 per TER. PM me if interested.
Mike\"When Inverted Down Is Up And Up Is Expensive\"
- Likes 1
Comment
-
Originally posted by Dirty Dee View PostFinally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware. Anyone with a 3D printer can download the STL files from my cults3d profile:
https://cults3d.com/en/3d-model/game...e-ejector-rack
I can also 3D print these in ABS for $12 per TER. PM me if interested.
This Foam revolution has really brought back my modeling skills from yester- year!
For a lot of guys 20 years ago... it more an either or( RC / Plastic Static modeling) ... with a bit of bleed over.. NOW..... with such a high quality, high performance, wide variety and with the advent fo 3D printing the two hobbies have really melded quite nicely!Current Hanger: FW, F4.F22,F14, Byron T-6, Top Flite P-47, Top Flite P-40, Top RC P-51 H9 P-51, SebArt Avanti, Yellow aircraft Spitfire, T Jeti Extreme Flight EDGE, DS-24 Carbon,
- Likes 1
Comment
-
Originally posted by Dirty Dee View PostFinally finished my Triple Ejector Rack design utilizing the Freewing attachment hardware.I solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 2
Comment
-
Originally posted by Dirty Dee View PostThanks guys!I'm sure several people have accidentally tipped a wing and broke their sidewinder rail adapter, so I made a replacement. Figured I should do it while mine is still in one piece :)https://www.thingiverse.com/thing:3372292
ps: printing your TER as I write, too cool for schoolI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
- Likes 1
Comment
-
Originally posted by Elbee View Post
DD, GeeWhiz, Man, do you even have a social life? LOL LOL LOL Thank you and yes I have 'Foam Tac' -ed mine once already. Best, LB
ps: printing your TER as I write, too cool for school
Havent flown in over 2 months now, cant wait for spring
Comment
Comment