Originally posted by Hemidoo
View Post
Announcement
Collapse
No announcement yet.
Official Freewing 80mm EDF L-39 Albatros Thread
Collapse
X
-
Originally posted by bmoranx View PostIs anyone missing their belly gun pod? My bird came today and it went together without issue other than the missing gun pod. Hope to maiden her this weekend weather permitting of course!
Well, post #350, page 18.
Comment
-
Originally posted by TiredIronGRB View Post
Thanks for posting your maidens, guys keep 'em coming! I look forward to yours, Pat. This bird gets even better with time. I'm working on tail sits, trying to get a brief hover. But you're right, George, the landings so far are always easy as a confidence builder.
I've got one in the paint booth...
Live Q&A every Tuesday and Friday at 9pm EST on my Twitch Livestream
Live chat with me and other RC Nuts on my Discord
Camp my Instagram @Alpha.Makes
- Likes 3
Comment
-
My second flight of freewing L39. Its fleet week here so put on a scale airshow performance. What a great jet! My favorite freewing edf So far!!! https://youtu.be/D9Y-iVbYq0c
- Likes 3
Comment
-
Originally posted by JazzmanB View PostMy maiden https://youtu.be/19PanQrqpKo
Comment
-
Put the first three flights on mine today and was very comfortable with it before the maiden was finished. It slows down enough for landing that even the free wheeling on asphalt I was concerned about was not an issue.
This was the best video shot of it today. Shot by another club member using my good camera. Could have used a little more zoom but at least the plane was in frame for the whole flight.
My YouTube Videos https://www.youtube.com/channel/UCrz...4Q-xrOOtP2C-8w
- Likes 1
Comment
-
Originally posted by Ron1950 View PostI am going to y harness the gear but cant find which plug is the mains in the wing elec block normally id just use my servo tester to figure it out but it is in tx and I am in Mississippi for few days any help is appreciated
blue box is very intermident on the gear channel
Start at 2:20 and he shows you exactly which ones are the lights.
Comment
-
thanks viper I got the gear all wired up by passing the blue box and the good news is they work every time and no hesitation and not intermident at all. saw tat the nose gear steering is not working so I Y harnessed the rudder and nose steering then to the rx and that works now.... ill watch the light mod and see if its worth doing..btw can the landing lights be Y harnessed to the rx direct voltage wise or will it burn them out?
Comment
-
Just to give everybody a heads up maidened mine today did great but when I landed the rudder moved almost all the way right found that the servo retaining screw was very loose that it let the horn move on the output shaft tightened it down and checked all the other servo horns all the screws were loose you might want to check yours it’s a stupid way to lose a brand new plani
- Likes 2
Comment
-
Maiden +3 today (wound up taking the A-10 too and used two of my packs for it ;)). Only needed 3 clicks of left trim. Flies on rails, lands like a feather with almost no power. Never went full flaps on landing, half flaps was plenty. Roll out was not bad, but I got it slowed down pretty good before touchdown. No video, but I should have some in-flight stills later.
Flies stable like the A-10, but sporty like the Avanti S. Freewing/MRC has another winner on their hands!Pat
- Likes 1
Comment
-
Originally posted by Ron1950 View Postthanks viper I got the gear all wired up by passing the blue box and the good news is they work every time and no hesitation and not intermident at all. saw tat the nose gear steering is not working so I Y harnessed the rudder and nose steering then to the rx and that works now.... ill watch the light mod and see if its worth doing..btw can the landing lights be Y harnessed to the rx direct voltage wise or will it burn them out?
I've noticed just today after I got everything hooked up, that the retracts have a very long delay ( 3 to 5 seconds) - longer than any other plane I've got. Are you sure you were allowing enough time for the retracts to respond? I'm leaving mine as is. The delay doesn't bother me. It may simply be the nature of the beast (control board).
Comment
Comment